Page 10 – CrossChem Market

Bitumen Cleaner PRO (30 L)

Bitumen Cleaner PRO 30 L is a professional cleaning solution designed for the effective removal of bitumen, asphalt residues, tar and other petroleum based contaminants from vehicle bodywork, wheels and other exterior surfaces. Thanks to its high content of mineral oils (solvents) with an elevated boiling point, the product effectively dissolves even stubborn, viscous and hardened deposits, making them easier to remove.

The product is intended for professional use and is ideal for automotive workshops, car wash facilities, transport companies, manufacturing plants and industrial maintenance applications. The 30 L professional container provides an economical solution for high volume use, making it suitable for cleaning large surface areas and integrating into regular maintenance operations.

Directions for use

Before use, ensure that the surface to be treated is dry and cool. Apply Bitumen Cleaner PRO undiluted directly to bitumen, tar, asphalt or other petroleum-based contamination using a sprayer, cloth, brush or other chemically resistant application equipment. Allow the product to work for approximately 2–5 minutes, without allowing it to dry completely on the surface. Then remove the dissolved contamination with a soft cloth or rinse with water and a suitable cleaning agent. Repeat the treatment if the contamination is particularly stubborn or hardened.

Before using the product on painted, lacquered, plastic, rubber or other sensitive surfaces, test it first on a small, inconspicuous area. Do not use on hot surfaces or in direct sunlight. Use only in a well-ventilated area while wearing suitable protective gloves and eye or face protection.

Composition

High-boiling hydrocarbon solvents and other ingredients designed to dissolve bitumen, tar, asphalt and petroleum-based contamination.

Bitumen Cleaner PRO (500 ml)

CarCare BITUMEN CLEANER PRO 500 ml by CrossChem is a professional grade aerosol cleaner developed for fast and effective removal of stubborn bitumen, tar, asphalt residues, grease and road dirt from vehicle surfaces. Equipped with an upgraded high pressure aerosol can, it delivers a stronger and more consistent spray, allowing the cleaner to cover larger areas quickly while improving cleaning efficiency.

Its advanced formula penetrates deep into contaminants, dissolving even persistent deposits without damaging painted or metal surfaces. The product restores the original appearance of treated areas while helping preserve the finish and colour of the vehicle.

Ideal for use on cars, motorcycles, commercial vehicles and other metal surfaces, CarCare BITUMEN CLEANER PRO is especially effective after long journeys, road construction exposure and seasonal road maintenance when bitumen and tar contamination is most common.

Manufactured in Latvia by CrossChem, a trusted producer of automotive chemical solutions, CarCare BITUMEN CLEANER PRO combines professional performance with convenient everyday use, making it an excellent choice for workshops, detailing professionals and vehicle owners.

Key Benefits:

• Effectively removes bitumen, tar, asphalt, grease and road dirt.
• Upgraded high pressure aerosol can for stronger and more efficient application.
• Penetrates deeply and dissolves stubborn contaminants.
• Safe for painted and metal surfaces.
• Restores a clean appearance while preserving the original finish.
• Suitable for cars, motorcycles, commercial vehicles and other metal surfaces.
• Designed for both professional and personal use.

Brake Cleaner PRO (30 L)

Brake Cleaner PRO 30 L is a powerful professional cleaner designed for the effective removal of grease, oils and other non polar compounds, including petroleum based products, fatty acid processing residues and mechanical contaminants. It is especially suitable for cleaning brake discs, brake pads and other brake components, efficiently removing brake dust, oil, grease and stubborn dirt.

The product is also ideal for general cleaning of vehicle chassis, engines, transmissions and other mechanical components contaminated with oil, grease and debris, helping maintain clean and properly functioning parts.

Supplied in a 30 L professional container, Brake Cleaner PRO is an excellent choice for automotive workshops, fleet maintenance facilities and industrial applications. The large volume provides an economical solution for intensive use, ensures continuous product availability and allows easy integration into workshop cleaning systems and spray equipment.

Brake Cleaner PRO (500 ml)

CarCare BRAKE CLEANER PRO 500 ml is a professional grade aerosol cleaner specially developed for effective cleaning of vehicle brake systems, clutches and other metal components. The powerful formula quickly dissolves and removes brake dust, oil, grease and other stubborn contaminants, helping to maintain optimal brake component performance.

CarCare BRAKE CLEANER PRO features an upgraded high pressure aerosol can, delivering a stronger and more consistent spray for faster coverage of larger surfaces and improved cleaning efficiency. It is an ideal solution for both routine vehicle maintenance and professional workshop applications.

Regular use of CarCare BRAKE CLEANER PRO helps reduce brake noise and vibration, improves braking performance and contributes to greater driving safety. Its fast evaporating formula leaves no residue, making it suitable for cleaning sensitive metal components.

Manufactured by CrossChem, a trusted producer of automotive chemical solutions, CarCare BRAKE CLEANER PRO combines professional performance with ease of use, making it an excellent choice for workshops, detailing professionals and vehicle owners.

Key Benefits:

• Effectively removes brake dust, oil, grease and other contaminants.
• Upgraded high pressure aerosol can provides stronger and more efficient spraying.
• Improves braking performance and enhances driving safety.
• Helps reduce brake noise and vibration.
• Fast evaporating residue free formula.
• Suitable for cleaning brake systems, clutches and metal surfaces.
• Designed for both professional and personal use.

Antifreeze VCS (Yellow) -36°C (210L)

CrossChem Antifreeze VCS Long Life is a premium-class, ready-to-use coolant based on the highest-quality ethylene glycol, also known as MEG. The product is designed to provide long-term protection for modern petrol and diesel engine cooling systems against freezing, overheating, corrosion and damage to cooling system components.

Antifreeze VCS Long Life provides protection against freezing at temperatures down to –36 °C and helps maintain stable cooling system operation at elevated temperatures of up to +107 °C. The product is pre-mixed and ready to use, so no additional dilution with water is required. This reduces the risk of incorrect mixing and ensures the required level of protection immediately after the product is added to the system.

The effective and balanced corrosion inhibitor package based on OAT, or Organic Acid Technology, helps provide long-lasting protection against corrosion and damage. The product supports efficient heat transfer, a stable engine operating temperature and optimal cooling system performance under various operating conditions.

Antifreeze VCS Long Life is especially suitable for the cooling systems of modern passenger cars, commercial vehicles, trucks, buses, agricultural machinery, construction equipment and industrial machinery requiring a high-performance, long-life coolant.

The product contains ethylene glycol, corrosion inhibitors, demineralised water and colourant.

CrossChem Antifreeze VCS Long Life complies with the following quality standards and manufacturer requirements: ASTM D6210, BS 6580, Hitachi, Isuzu, John Deere JDM H5, DAF 74002, Ford Europe WSS-M97B44-D, Komatsu 07.892, Mazda MEZ MN 121D, Mercedes-Benz 326.3, MAN Steyr 324, MAN 324 Type SNF, MAN B&W AG D36 5600, Mack 014 GS 17009, Opel GM 6277M, Renault 41-01-001 / Type D, Scania TB 1451 and TI 2-98 08 13 TB, MTU MTL 5084, Volvo Penta, Iveco, Iveco Bus and Irisbus Karosa.

Directions for use

The product is ready to use. Before filling, make sure that VCS Long Life antifreeze meets the requirements specified by the vehicle or equipment manufacturer.

Add the product to the cooling system in accordance with the vehicle or equipment manufacturer’s instructions. Do not add water, as the product has already been prepared at the required concentration.

Do not mix with other coolants unless their chemical compatibility has been confirmed. When replacing a coolant of unknown origin or based on a different technology, it is recommended to drain and flush the cooling system completely.

Only open the cooling system when the engine is switched off and has cooled down completely. A hot system may be under pressure and may present a risk of burns.

Availability

CrossChem Antifreeze VCS Long Life is available directly from the manufacturer in various packaging sizes and in the quantity required by the customer. Direct supply from the manufacturer allows competitive pricing for private customers, vehicle service centres, transport companies, manufacturing facilities, agricultural businesses and large vehicle fleets.

Safety information

Harmful if swallowed. Do not breathe product mist or vapours. Wash hands thoroughly after use. Do not eat, drink or smoke while using this product.

Wear suitable protective gloves and eye or face protection. If the product enters the eyes, rinse cautiously with clean water for several minutes. Remove contact lenses, if present and easy to do, then continue rinsing.

If swallowed, rinse the mouth and immediately contact a doctor or poison information centre. Do not induce vomiting unless instructed to do so by a medical professional.

Keep out of reach of children and animals. Store in the tightly closed original container in a cool, dry and well-ventilated place. Prevent the product from entering drains, surface water or groundwater. Use the current CrossChem Antifreeze VCS Long Life safety data sheet for product labelling and published safety information.

Shelf life

3 years.

Antifreeze VCS (Yellow) -36°C (20L)

The product contains ethylene glycol, corrosion inhibitors, demineralised water and colourant.

Directions for use

The product is ready to use. Before filling, make sure that VCS Long Life antifreeze meets the requirements specified by the vehicle or equipment manufacturer.

Only open the cooling system when the engine is switched off and has cooled down completely. A hot system may be under pressure and may present a risk of burns.

Availability

Safety information

Harmful if swallowed. Do not breathe product mist or vapours. Wash hands thoroughly after use. Do not eat, drink or smoke while using this product.

If swallowed, rinse the mouth and immediately contact a doctor or poison information centre. Do not induce vomiting unless instructed to do so by a medical professional.

Shelf life

3 years.

Antifreeze VCS (Yellow) -36°C (4L)

The product contains ethylene glycol, corrosion inhibitors, demineralised water and colourant.

Directions for use

The product is ready to use. Before filling, make sure that VCS Long Life antifreeze meets the requirements specified by the vehicle or equipment manufacturer.

Only open the cooling system when the engine is switched off and has cooled down completely. A hot system may be under pressure and may present a risk of burns.

Availability

Safety information

Harmful if swallowed. Do not breathe product mist or vapours. Wash hands thoroughly after use. Do not eat, drink or smoke while using this product.

If swallowed, rinse the mouth and immediately contact a doctor or poison information centre. Do not induce vomiting unless instructed to do so by a medical professional.

Shelf life

3 years.

Antifreeze VCS (Yellow) -36°C (10L)

The product contains ethylene glycol, corrosion inhibitors, demineralised water and colourant.

Directions for use

The product is ready to use. Before filling, make sure that VCS Long Life antifreeze meets the requirements specified by the vehicle or equipment manufacturer.

Only open the cooling system when the engine is switched off and has cooled down completely. A hot system may be under pressure and may present a risk of burns.

Availability

Safety information

Harmful if swallowed. Do not breathe product mist or vapours. Wash hands thoroughly after use. Do not eat, drink or smoke while using this product.

If swallowed, rinse the mouth and immediately contact a doctor or poison information centre. Do not induce vomiting unless instructed to do so by a medical professional.

Shelf life

3 years.

Laundry detergent Tex Powder White (12.5 kg)

TEX POWDER WHITE is a concentrated, phosphate-free laundry powder for machine washing white textiles. Its enzyme-based formula helps release greasy dirt, stains and fine dirt particles from fabric fibres, providing effective washing at temperatures from 30 °C to 60 °C.

The product is suitable for regular use in locations where large volumes of laundry are processed every day, including hotels, guest houses, cleaning companies, laundries, public institutions and production facilities. It can also be used for washing white mops and other white cleaning textiles.

The professional 12.5 kg pack is a practical choice for intensive use, helping businesses plan detergent consumption more efficiently and reducing the need for frequent restocking. After washing, the laundry is left with a pleasant fragrance.

The recommended dosage is 28–48 ml per 1 kg of dry laundry. The exact amount should be selected according to the degree of soiling and water hardness. For the best results and to avoid unnecessary product consumption, sort laundry by fabric type and degree of soiling before washing, and always follow the temperature instructions shown on the textile care label.

White textiles should be washed separately from coloured laundry to help preserve their bright appearance. The product is not suitable for wool or silk.

TEX POWDER WHITE is a professional choice for businesses and households that require effective white laundry washing, accurate dosing and economical product consumption.

Laundry detergent Tex Powder COLOR (12.5 kg)

Tex Powder COLOR is a concentrated, phosphate-free laundry powder for machine washing coloured textiles. Its enzyme-based formula helps release greasy dirt, stains and fine dirt particles from fabric fibres, providing effective washing at temperatures from 30 °C to 60 °C.

The recommended dosage is 28–48 ml per 1 kg of dry laundry. The exact amount should be selected according to the degree of soiling and water hardness. For the best results and to avoid unnecessary product consumption, sort laundry by colour, fabric type and degree of soiling before washing, and always follow the temperature instructions shown on the textile care label.

New or intensely coloured textiles should be washed separately during the first 2–3 wash cycles. The product is not suitable for wool or silk.

Tex Powder COLOR is a professional choice for businesses and households looking for effective coloured laundry washing, accurate dosing and economical product consumption.

Call us

Bitumen Cleaner PRO (30 L)

Bitumen Cleaner PRO (500 ml)

Brake Cleaner PRO (30 L)

Brake Cleaner PRO (500 ml)

Antifreeze VCS (Yellow) -36°C (210L)

Antifreeze VCS (Yellow) -36°C (20L)

Antifreeze VCS (Yellow) -36°C (4L)

Antifreeze VCS (Yellow) -36°C (10L)

Laundry detergent Tex Powder White (12.5 kg)

Laundry detergent Tex Powder COLOR (12.5 kg)

Secure Payments

Fast Delivery

Return Policy

Customer Service