CarCare BITUMEN CLEANER by CrossChem is an effective aerosol cleaner designed to remove bitumen, tar, asphalt, grease and other road-related contamination from vehicle surfaces. Its formula penetrates stubborn dirt, gently dissolves it and helps lift it away from the treated surface while preserving the original appearance of the material.

The cleaner is suitable for cars, motorcycles, metal parts and alloy wheels. It is particularly useful after driving on repaired roads, long journeys or during the winter season, when bitumen, road grease and other persistent contaminants accumulate on vehicle surfaces. The convenient 400 ml aerosol can ensures precise and even application for both professional vehicle care and everyday use at home.

Directions for use

Make sure the surface is dry before application. Shake the can thoroughly. Spray the product directly onto the contaminated area from a distance of approximately 10–20 cm. Allow it to work for 3 minutes, then wipe the surface with a paper towel or soft cloth. Repeat the treatment on heavily soiled areas if necessary. Do not spray onto open flames or hot materials. Before using the product on painted or sensitive surfaces, test it first on a small, inconspicuous area.

Composition

Aliphatic hydrocarbons more than 30%, mineral spirits, cyclohexane, butane, non-ionic surfactants 15–30% and propane.

Safety information

Extremely flammable aerosol. Pressurised container: may burst if heated. May cause skin irritation and drowsiness or dizziness. May be fatal if swallowed and enters the airways. Toxic to aquatic life with long-lasting effects. Keep out of reach of children.

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke during use. Do not spray on an open flame or other ignition source. Do not pierce or burn the container, even after use. Use only in a well-ventilated area and avoid inhaling aerosol, vapours or fumes. Wear protective gloves, protective clothing and eye or face protection during use.

In case of contact with skin, wash the affected area immediately with plenty of water. If the product enters the eyes, rinse cautiously with clean water for several minutes. Remove contact lenses, if present and easy to do, then continue rinsing. If swallowed, immediately contact a doctor or poison information centre. Do not induce vomiting. Seek medical attention if irritation or other symptoms persist.

Store in the tightly closed original container in a dry, cool and well-ventilated place at a temperature between –5 °C and +30 °C. Protect from direct sunlight and do not expose to temperatures exceeding +50 °C. Do not store inside a vehicle. An explosive vapour-air mixture may form in poorly ventilated areas.

Dispose of the contents and container in accordance with local waste management regulations.

CrossChem FOAM CLEANER is a multifunctional aerosol cleaner with active foam for the everyday care of various surfaces. The fine and even foam helps effectively remove dirt, dust and stains while allowing the product to remain on the treated surface for longer. After cleaning, the surface is left clean and well maintained, with a pleasant fragrance. The cleaner is suitable for cleaning vehicle interior components, leather and artificial leather, plastic parts, furniture, textiles, glass and metal surfaces. The convenient 400 ml aerosol can ensures even application and allows precise treatment of the required surface in vehicles, homes, offices or workshops.

Directions for use

Shake the can thoroughly before use. Hold the can approximately 10 to 15 cm away from the surface and spray the cleaning foam evenly. Allow the product to work for 1–2 minutes, then wipe the surface with a clean, soft cloth or paper towel. Treat heavier dirt with a soft brush or cloth. When cleaning textiles or other sensitive materials, first test the product on a small, inconspicuous area to ensure that the material does not discolour or become damaged. Wipe glass and metal surfaces before the foam dries completely to prevent residue or cleaning marks.

Composition

Demineralised water, non-ionic surfactants 5–15%, aliphatic hydrocarbons 5–15%, isopropanol, butane, propane and fragrance.

Safety information

Extremely flammable aerosol. Pressurised container: may burst if heated. The product may cause skin irritation and serious eye damage. Keep out of reach of children. Keep away from open flames, hot surfaces, sparks and other ignition sources. Do not smoke during use. Do not spray on an open flame or other ignition source. Do not pierce or burn the container, even after use. Use only in a well-ventilated area and avoid inhaling the aerosol. Wear protective gloves and eye or face protection during use.

In case of contact with skin, immediately wash the affected area with plenty of water. If the product enters the eyes, rinse cautiously with clean water for several minutes. Remove contact lenses, if present and easy to do, then continue rinsing. If irritation or discomfort persists, immediately contact a doctor or poison information centre.

Store in the tightly closed original container in a dry, cool and well-ventilated place at a temperature between –5 °C and +30 °C. Protect from direct sunlight and do not expose to temperatures exceeding +50 °C. Do not store inside a vehicle and keep at a safe distance from heat, fire, sparks and other ignition sources. An explosive vapour-air mixture may form in poorly ventilated areas.

Dispose of the contents and container in accordance with local waste management regulations.