Page 3 – CrossChem Market

Acetic Acid 90% (Food Grade)

Acetic acid 90% Food Grade (CH₃COOH) is a highly concentrated aqueous solution of acetic acid intended for use in food processing and other applications where food-grade quality is required. It is commonly used as an acidity regulator, preservative and processing aid in food manufacturing, as well as for pH adjustment and the production of food ingredients and other chemical compounds. The product may also be used in industrial applications requiring high-purity acetic acid.

For professional use only! The product is highly concentrated and is not intended for direct consumption. Store in the original packaging, tightly closed, in a cool, dry and well-ventilated place, away from direct sunlight, heat, sparks and open flames. Keep away from incompatible substances, including strong oxidising agents and alkalis. Keep out of the reach of children. Storage conditions and shelf life must comply with the manufacturer’s safety data sheet and product specification.

Danger! Flammable liquid and vapour. Causes severe skin burns and eye damage. Do not breathe mist or vapours. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Wear protective gloves/protective clothing/eye protection/face protection. IF SWALLOWED: Rinse mouth. DO NOT induce vomiting. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor. Dispose of contents/container in accordance with local and international regulations. Keep out of the reach of children.

Acetic Acid 80%

Acetic acid 80% (CH₃COOH) is a concentrated aqueous solution widely used in various industries, including chemical manufacturing, food processing, agriculture and water treatment. The substance is used as a raw material in the production of acetates, solvents and other chemical compounds. In industrial applications, acetic acid is used for pH adjustment, cleaning and removal of mineral deposits from equipment and surfaces. It is also used in the textile and pharmaceutical industries and in the manufacture of cleaning agents.

For professional use only! Store the product in its original packaging, tightly closed, in a cool, dry and well-ventilated place, away from direct sunlight, heat, sparks and open flames. Keep away from incompatible substances, including strong oxidising agents and alkalis. Keep out of the reach of children. Storage conditions and shelf life must comply with the manufacturer’s safety data sheet and product specifications.

Danger! Flammable liquid and vapour. Causes severe skin burns and eye damage. Do not breathe mist or vapours. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Wear protective gloves/protective clothing/eye protection/face protection. IF SWALLOWED: Rinse mouth. DO NOT induce vomiting. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor. Dispose of contents/container in accordance with local and international regulations. Keep out of the reach of children.

Universal OIL – RUST cleaner (400 ml)

CrossChem RUST CLEANER is a multifunctional aerosol product designed to loosen rusted connections and clean, lubricate and protect metal components. The product penetrates rust-affected areas, helps break down rust and releases seized bolts, nuts, hinges, locks and other moving mechanisms.

It simultaneously cleans, lubricates and helps protect metal parts against moisture and further corrosion. The product is suitable for use on cars, motorcycles, bicycles, boats, household appliances, workshop equipment, tools and various metal mechanisms. CrossChem RUST CLEANER is a practical solution for professional use in workshops and service centres, as well as for everyday maintenance and repair work at home.

Directions for use

Before use, clean and degrease the surface to be treated. Shake the can thoroughly. Hold the can approximately 15–25 cm away from the component or mechanism and spray the product evenly onto the rusted area. Allow the product to work for 5–10 minutes so that it can penetrate and loosen the rusted connection. Then wipe the component with a clean cloth or proceed with the required repair work. Repeat the treatment if necessary on heavily rusted parts. Before applying the product to painted, plastic or other sensitive surfaces, test it first on a small, inconspicuous area.

Composition

Penetrating oils more than 30%, aliphatic hydrocarbons more than 30%, corrosion inhibitors, mineral spirit, butane, propane, non-ionic surfactants less than 5% and nonanoic acid.

Safety information

Extremely flammable aerosol. Pressurised container: may burst if heated. May cause skin irritation, serious eye damage and drowsiness or dizziness. Harmful to aquatic life with long-lasting effects. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke during use. Do not spray on an open flame or other ignition source. Do not pierce or burn the container, even after use.

Use only in a well-ventilated area and avoid inhaling the aerosol. Wear protective gloves, protective clothing and eye or face protection during use. In case of contact with skin, immediately wash the affected area with plenty of water. If the product enters the eyes, rinse cautiously with clean water for several minutes. Remove contact lenses, if present and easy to do, then continue rinsing. If eye irritation persists or other health effects occur, immediately contact a doctor or poison information centre.

Store in the tightly closed original container in a dry, cool and well-ventilated place at a temperature between –5 °C and +30 °C. Protect from direct sunlight and do not expose to temperatures exceeding +50 °C. Do not store inside a vehicle. Keep at a safe distance from heat, fire, sparks and other ignition sources. An explosive vapour-air mixture may form in poorly ventilated areas.

Dispose of the contents and container in accordance with local waste management regulations.

Bitumen cleaner (400 ml)

CarCare BITUMEN CLEANER by CrossChem is an effective aerosol cleaner designed to remove bitumen, tar, asphalt, grease and other road-related contamination from vehicle surfaces. Its formula penetrates stubborn dirt, gently dissolves it and helps lift it away from the treated surface while preserving the original appearance of the material.

The cleaner is suitable for cars, motorcycles, metal parts and alloy wheels. It is particularly useful after driving on repaired roads, long journeys or during the winter season, when bitumen, road grease and other persistent contaminants accumulate on vehicle surfaces. The convenient 400 ml aerosol can ensures precise and even application for both professional vehicle care and everyday use at home.

Directions for use

Make sure the surface is dry before application. Shake the can thoroughly. Spray the product directly onto the contaminated area from a distance of approximately 10–20 cm. Allow it to work for 3 minutes, then wipe the surface with a paper towel or soft cloth. Repeat the treatment on heavily soiled areas if necessary. Do not spray onto open flames or hot materials. Before using the product on painted or sensitive surfaces, test it first on a small, inconspicuous area.

Composition

Aliphatic hydrocarbons more than 30%, mineral spirits, cyclohexane, butane, non-ionic surfactants 15–30% and propane.

Safety information

Extremely flammable aerosol. Pressurised container: may burst if heated. May cause skin irritation and drowsiness or dizziness. May be fatal if swallowed and enters the airways. Toxic to aquatic life with long-lasting effects. Keep out of reach of children.

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke during use. Do not spray on an open flame or other ignition source. Do not pierce or burn the container, even after use. Use only in a well-ventilated area and avoid inhaling aerosol, vapours or fumes. Wear protective gloves, protective clothing and eye or face protection during use.

In case of contact with skin, wash the affected area immediately with plenty of water. If the product enters the eyes, rinse cautiously with clean water for several minutes. Remove contact lenses, if present and easy to do, then continue rinsing. If swallowed, immediately contact a doctor or poison information centre. Do not induce vomiting. Seek medical attention if irritation or other symptoms persist.

Store in the tightly closed original container in a dry, cool and well-ventilated place at a temperature between –5 °C and +30 °C. Protect from direct sunlight and do not expose to temperatures exceeding +50 °C. Do not store inside a vehicle. An explosive vapour-air mixture may form in poorly ventilated areas.

Dispose of the contents and container in accordance with local waste management regulations.

Wheel Care Kit by CrossChem

CrossChem WHEEL CARE + WHEEL REACT wheel care kit is a combination of two complementary wheel cleaning products designed for effective care of steel and alloy wheels.

For the most thorough cleaning result, it is recommended to use both products sequentially, as each product targets different types of contamination and performs a specific role in the wheel cleaning process.
The main difference between the two products is their function in the cleaning process: WHEEL CARE is designed to clean and degrease the wheel surface, while WHEEL REACT acts more specifically on metallic particles and stubborn brake-related deposits. Therefore, the most effective result is achieved by using both products one after the other.

It is recommended to use WHEEL CARE first to clean the wheel surface. The product is ready to use. Spray it onto a cleaned, dry wheel surface, allow it to act for 1–2 minutes without allowing the product to dry, and then rinse thoroughly with a strong stream of running water. After rinsing and drying the surface, use WHEEL REACT as the second cleaning step.
Spray it onto a dry wheel surface and allow it to act for 2 to 3 minutes until the characteristic red colour appears, then rinse the treated surface thoroughly with a strong stream of running water. Neither product should be allowed to dry on the surface being cleaned, and they must not be used in direct sunlight or on a hot surface.

WHEEL CARE:
A powerful wheel cleaning and degreasing product designed to remove brake dust, road dirt, grease, lubricants and other everyday contaminants accumulated on wheels. It works as the first cleaning stage, helping to thoroughly clean the wheel surface and prepare it for the next step.

Composition: Sodium hydroxide; EDTA (ethylenediaminetetraacetic acid) and its salts <5%; Non-ionic surfactant <5%; Anionic surfactant <5%; Fragrance and aromatic composition. Safety instructions: DANGER! Causes severe skin burns and eye damage. Do not breathe fumes, gas, mist, vapours or spray. Wear protective gloves, protective clothing, eye protection and face protection. Wash hands thoroughly after use. IF SWALLOWED: rinse mouth. DO NOT induce vomiting. IF ON SKIN (or hair): immediately take off all contaminated clothing and rinse skin with water or shower. IF INHALED: move the affected person to fresh air and keep comfortable for breathing. IF IN EYES: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do, and continue rinsing. Immediately contact a Poison Information Centre or doctor. Dispose of contents/container in accordance with local and international regulations.

Storage and shelf life: Store in the original packaging, tightly closed, in a cool, dry and well-ventilated place, away from direct sunlight. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep out of reach of children. Storage temperature: from +5 °C to +35 °C. Shelf life: 36 months from the date of manufacture in unopened manufacturer’s packaging. See the packaging for the batch number and date of manufacture. The surfactants contained in the product comply with the biodegradability criteria in accordance with EC Regulation No. 648/2004 on detergents.

WHEEL REACT:
A wheel cleaner with an active formula that reacts with metallic particles and stubborn brake-related deposits present on the wheel surface. During the product’s action, the liquid turns a characteristic red colour, visually indicating that the reaction is taking place.

Composition: Sodium mercaptoacetate; Carboxylates 5–15%; Non-ionic surfactants <5%; Anionic surfactant <5%. Safety instructions: DANGER! Harmful if swallowed. Causes severe skin burns and eye damage. May cause an allergic skin reaction. Suspected of damaging fertility or the unborn child. May cause damage to organs (heart) through prolonged or repeated exposure. Contains sodium mercaptoacetate. May cause an allergic reaction. Do not breathe fumes, gas, mist, vapours or spray. Wear protective gloves, protective clothing, eye protection and face protection. Wash hands thoroughly after use. IF SWALLOWED: rinse mouth. DO NOT induce vomiting. IF ON SKIN (or hair): immediately take off all contaminated clothing and rinse skin with water or shower. IF INHALED: move the affected person to fresh air and keep comfortable for breathing. IF IN EYES: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do, and continue rinsing. Immediately contact a Poison Information Centre or doctor. Dispose of contents/container in accordance with local and international regulations.

Antifreeze G11 concentrate (210L)

CrossChem Antifreeze G11 Concentrate is a high-quality coolant concentrate based on ethylene glycol, also known as MEG. It is designed to protect petrol and diesel engine cooling systems against freezing, overheating and corrosion.

The balanced corrosion inhibitor package based on OAT, or Organic Acid Technology, helps protect components made from aluminium, iron, brass, steel and copper alloys while supporting efficient heat transfer and stable cooling system operation.

When mixed with distilled or demineralised water in the appropriate ratio, the concentrate can be used to prepare ready-to-use G11 antifreeze with freezing protection down to –36 °C or –45 °C. The product is suitable for passenger cars, commercial vehicles, trucks and other machinery equipped with compatible liquid cooling systems.

CrossChem Antifreeze G11 complies with the following quality standards: ASTM D3306, BS 6580, CES 14603, CUNA NC 956-16, ANFOR NF R15-601, SAE J 1034, BWB and FSD 8704.

Recommended mixture

Mix the antifreeze concentrate only with distilled water or high-quality demineralised water according to the required freezing protection level and the vehicle manufacturer’s instructions. Do not mix with other coolants unless their chemical compatibility has been confirmed.

CrossChem demineralised water is produced using double reverse osmosis technology, reducing the content of minerals, salts and ions in the water by more than 97%. Using high-quality demineralised water helps prevent unwanted mineral deposits and supports the optimal quality and performance of the antifreeze mixture.

Antifreeze G11 Concentrate and CrossChem demineralised water are available directly from the manufacturer in various packaging sizes and in any quantity required by the customer. Direct supply from the manufacturer allows us to offer competitive pricing for private customers, vehicle service centres, transport companies, manufacturing facilities and large vehicle fleets. CC-Market offers G11 concentrate together with several packaging options for demineralised water.

Safety information

Harmful if swallowed. Suspected of damaging fertility or the unborn child. May cause damage to organs through prolonged or repeated exposure. Read the specific safety instructions and the product safety data sheet before use. Do not breathe vapours, mist or spray. Wash hands thoroughly after handling. Do not eat, drink or smoke while using this product.

Wear protective gloves, protective clothing and eye or face protection. If swallowed, rinse the mouth and contact a poison information centre or doctor if you feel unwell. Do not induce vomiting unless instructed to do so by a medical professional. If exposure has occurred or there are concerns about possible exposure, seek medical advice.

Store in the tightly closed original container, locked up and out of reach of children. Prevent the product from entering drains, surface water or groundwater. Dispose of the contents and container in accordance with applicable local regulations.

Shelf life

3 years.

Antifreeze G11 concentrate (20L)

CrossChem Antifreeze G11 complies with the following quality standards: ASTM D3306, BS 6580, CES 14603, CUNA NC 956-16, ANFOR NF R15-601, SAE J 1034, BWB and FSD 8704.

Recommended mixture

Safety information

Shelf life

3 years.

Antifreeze G11 concentrate (1,85L)

CrossChem Antifreeze G11 complies with the following quality standards: ASTM D3306, BS 6580, CES 14603, CUNA NC 956-16, ANFOR NF R15-601, SAE J 1034, BWB and FSD 8704.

Recommended mixture

Safety information

Shelf life

3 years.

Summer windshield washer fluid (4L)

Summer windshield washer fluid is a ready to use product developed for effective cleaning of vehicle windscreens and windows during the summer season. It quickly and thoroughly removes road dust, soot, mud, greasy dirt, oil residues, insects and insect remains, as well as other contaminants that collect on glass surfaces during everyday driving.

Thanks to its unique formula and the anionic and nonionic surfactants in its composition, the fluid provides strong cleaning performance, helping maintain a clear windscreen, good visibility and increased driving safety even in challenging conditions.

The product is gentle on vehicle surfaces and does not affect paintwork, lacquered surfaces, plastic parts, chrome components, rubber elements or windscreen wiper blades. The pleasant passion flower fragrance makes every use more enjoyable.

Composition: demineralised water, anionic surfactant, nonionic surfactant, passion flower fragrance, preservative and colourant.

Shelf life: 3 years.

Gross weight: 4.16 kg.

Kingspan TrolleyMaster 100L 12V Mobile Diesel Storage and Dispensing tank

The Kingspan TrolleyMaster 100 L is a compact and mobile diesel fuel storage and dispensing system designed for refuelling machinery, equipment and vehicles in locations where stationary fuel dispensing infrastructure is not available.

The tank is suitable for use on construction sites, in agriculture, forestry, grounds maintenance, road maintenance, service centres, repair workshops, equipment rental companies and other professional working environments. It allows up to 100 litres of diesel fuel to be delivered directly to the machinery requiring refuelling, reducing the need to transport the machinery to a filling station.

The tank can be used for refuelling excavators, loaders, tractors, generators, compressors, forklifts, construction machinery, agricultural and forestry equipment, grounds maintenance machinery, boats and other diesel-powered equipment.

The Kingspan TrolleyMaster 100 L is intended for the storage and dispensing of diesel fuel and HVO fuel. The tank must not be used for petrol, AdBlue®, water, food-grade liquids or other substances for which the tank and its dispensing equipment have not been designed.

Durable and Compact Construction

The tank body is manufactured from durable polyethylene, which does not corrode and is suitable for regular professional use. The material provides resistance to weather conditions while maintaining a relatively low empty weight.

The upright construction reduces the amount of space occupied by the tank inside a vehicle, warehouse or working area. The tank is approximately 380 mm long, 440 mm wide and 1,130 mm high.

An ergonomically profiled transport handle and non-slip gripping areas are integrated into the upper section of the tank, providing a more secure grip when pulling, lifting and positioning the tank.

Mobility with Solid Rubber Wheels

The Kingspan TrolleyMaster 100 L is equipped with two solid rubber wheels approximately 250 mm in diameter. These allow the tank to be moved in a similar manner to a hand trolley.

The solid rubber wheels are suitable for movement across asphalt, concrete, paving stones, gravel, compacted soil and other surfaces commonly found in professional working environments. They do not require tyre pressure maintenance and are not vulnerable to the punctures associated with pneumatic tyres.

A tank filled with fuel is considerably heavier than an empty tank. Before moving it, the condition and gradient of the surface, possible obstacles and the operator’s ability to control the tank safely must be assessed.

12 V Electric Diesel Fuel Pump

The tank is equipped with a 12 V electric diesel fuel pump, providing fast and convenient fuel dispensing directly at the worksite.

The pump is powered by an external 12 V battery. The standard equipment includes an electrical cable with battery terminal clamps. An integrated battery is not included, so a suitable external 12 V DC power source must be provided before use.

The actual fuel delivery rate may vary depending on battery voltage and charge level, fuel temperature and viscosity, hose position, the condition of the connections and resistance within the receiving system.

Before switching on the pump, ensure that the electrical cable, battery clamps, pump, hose and all connections are in good technical condition.

Automatic Diesel Fuel Dispensing Nozzle

The standard equipment includes an automatic diesel fuel dispensing nozzle with a swivel connection.

The automatic shut-off function helps stop fuel delivery when the fuel level inside the receiving tank reaches the nozzle shut-off point. This helps reduce the risk of overfilling and diesel fuel spillage.

The swivel connection reduces hose twisting and makes it easier to position the nozzle during refuelling.

The automatic nozzle does not remove the operator’s responsibility to supervise the refuelling process continuously. The automatic shut-off function may be affected by the shape of the filler opening, nozzle position, fuel flow, air exchange and fuel splashback against the walls of the receiving tank.

Integrated Nozzle Pocket

A dedicated dispensing nozzle pocket is integrated into the tank body. It protects the nozzle during transport and collects residual fuel dripping from the nozzle after refuelling.

The nozzle pocket can be removed and cleaned. Regular cleaning helps keep the tank and dispensing equipment tidy and reduces the accumulation of fuel residue.

After use, the nozzle must always be placed in its designated pocket. The nozzle must not be left on the ground or unsecured during transport.

Three-Metre Dispensing Hose

The Kingspan TrolleyMaster 100 L is equipped with an approximately 3-metre flexible diesel fuel dispensing hose.

The hose length provides convenient access to the machinery’s fuel tank, even where the mobile tank cannot be positioned directly next to the filler opening.

A dedicated hose storage groove is integrated into the tank body. After use, the hose can be wrapped around the tank, reducing the risk of damage, contamination or entanglement during transport and storage.

The hose must not be used to pull the tank, left on the ground or trapped between the tank and other objects.

K24 Digital Flow Meter

The tank is equipped with a K24 digital flow meter, allowing the quantity of dispensed diesel fuel to be monitored and recorded.

The digital display provides convenient fuel delivery readings during refuelling. The meter is particularly useful for companies that need to monitor fuel consumption, record the amount supplied to individual machines or compare fuel use across different worksites.

Flow meter readings and accuracy depend on correct installation, operating conditions and regular technical inspection. Where the measurements are used for official billing or regulated accounting purposes, the applicable metrological requirements must be checked separately.

Ball Shut-Off Valve and Vented Filler Cap

A 3/4-inch ball shut-off valve is integrated into the fuel dispensing system. It allows the fuel flow to be closed during tank transport, storage or maintenance.

Before moving or transporting the tank, ensure that the ball valve is fully closed and that there are no visible leaks in the system.

The tank is equipped with a fuel filler cap and a two-way ventilation valve. The ventilation system helps equalise the pressure inside the tank during diesel fuel filling and dispensing, reducing the risk of excessive pressure or vacuum formation.

The filler cap must be properly closed during use, storage and transport.

Securing During Transport

The tank body incorporates profiled corners and areas for positioning securing straps. These help position the straps correctly and reduce the risk of slipping during transport.

Inside a vehicle, the tank must be secured in a way that prevents it from sliding, tipping over, lifting or colliding with other objects.

Before transport, the hose must be placed in the designated storage groove, the nozzle must be inserted into its pocket, the electrical cable must be disconnected and secured, and the ball shut-off valve and filler cap must be closed.

The tank user and carrier are responsible for ensuring that the specific transport operation complies with applicable road traffic, dangerous goods transport, fire safety and load-securing requirements.

Standard Equipment

The standard equipment includes a Kingspan TrolleyMaster polyethylene tank with a nominal capacity of 100 L, a 12 V electric diesel fuel pump, an electrical cable with battery terminal clamps, an automatic diesel fuel dispensing nozzle with a swivel connection, a K24 digital flow meter, an approximately 3 m flexible dispensing hose, an integrated nozzle pocket, a hose storage groove, a 3/4-inch ball shut-off valve, a fuel filler cap with a two-way ventilation valve, an ergonomically profiled transport handle, non-slip gripping areas, profiled securing points for transport straps and two solid rubber wheels approximately 250 mm in diameter.

Use and Safety

Before using the tank, carefully read the operating instructions and comply with all applicable requirements relating to diesel fuel storage, transport, fire safety, occupational safety and environmental protection.

Place the tank on a stable and, where possible, level surface. Before each use, inspect the tank body, pump, dispensing hose, nozzle, flow meter, electrical cable, battery clamps, filler cap, ventilation valve, ball shut-off valve and all connections.

A damaged or leaking tank or dispensing system must not be used.

The engine of the machinery being refuelled must be switched off. Open flames, sparks, hot surfaces and other ignition sources must not be present in the working area. Smoking is prohibited during fuel dispensing.

The electrical cable must be connected to a suitable external 12 V battery in the sequence specified in the operating instructions. Insert the automatic nozzle into the fuel tank of the machinery, then switch on the pump and begin dispensing.

The refuelling process must be supervised at all times. When refuelling is complete, close the nozzle, switch off the pump, disconnect the electrical cable and close the ball shut-off valve.

After use, place the nozzle in its pocket and carefully store the hose in the designated groove around the tank body.

Any spilled diesel fuel must be collected immediately using a suitable absorbent material. The tank must not be overfilled, pulled by the hose or electrical cable, used with damaged connections or left operating unattended.

Technical Parameters

The Kingspan TrolleyMaster 100 L is a mobile diesel fuel storage and dispensing tank with a nominal capacity of 100 L. The tank is approximately 380 mm long, 440 mm wide and 1,130 mm high. It is equipped with a 12 V electric pump designed for connection to an external battery, an automatic diesel fuel dispensing nozzle with a swivel connection, a K24 digital flow meter, an approximately 3 m flexible dispensing hose, a 3/4-inch ball shut-off valve, a two-way ventilation valve and two solid rubber wheels approximately 250 mm in diameter.

Call us

Acetic Acid 90% (Food Grade)

Acetic Acid 80%

Universal OIL – RUST cleaner (400 ml)

Bitumen cleaner (400 ml)

Wheel Care Kit by CrossChem

Antifreeze G11 concentrate (210L)

Antifreeze G11 concentrate (20L)

Antifreeze G11 concentrate (1,85L)

Summer windshield washer fluid (4L)

Kingspan TrolleyMaster 100L 12V Mobile Diesel Storage and Dispensing tank

Secure Payments

Fast Delivery

Return Policy

Customer Service