CrossChem ETEX Anfti-friction additive for Industrial transmissions and axle gear (100ml)

ETEX anti-friction additive for the most industrial gearboxes and axle reducers with an oil capacity of up to 10 liters is the latest generation friction reducer that gives any standard oil unique properties. The spherical particles of mineral serpentinite are dispersed in oil and deposited on metal surfaces. They form a new friction pair, which significantly reduces friction between moving parts. The anti-friction additive for ETEX industrial gearboxes and axle reducers not only increases the anti-friction properties of the oil, but also ensures optimal oil performance for a long time, protecting your mechanism. This special solution reduces wear and improves the overall performance of the machine while providing additional protection.
After treatment with ETEX, the full effect remains for the first 50,000 kilometers for vehicles or 1,000 engine hours for equipment. When changing the oil / grease within this mileage, no refilling of ETEX is required.

Main benefits:
• Increases the motor resorces of machines and mechanisms.
• Restores the operating parameters of worn equipment.
• Reduces fuel consumption up to 15%.
• Reduces exhaust emissions.
• Reduces vibration and noise up to 30%.
• Reduces operating costs.
• Stabilizes and increases the compression and oil pressure.
• Protects during "COLD START-UP".
• Decreases working temperature.
• Reduces corrosion.

Working principle of ETEX:
ETEX affects the metal surface cleaning process. The friction process releases spherical mineral particles that smooth the metal surface, thus adjusting the surface structure to the friction process. A new friction surface is formed.
1. ETEX entering the friction zone and cleaning the friction surface.
2. Adhesion of ETEX particles to the metal surface.
3. Creation of a new friction pair in the friction zone from 8 to 10 microns thick.

Storage conditions:
• Keep the product away from heat and sparks.
• Store in a cool, dry and well-ventilated place away from direct sunlight.
• Protect from extreme cold and large temperature fluctuations.
• The product must not be stored above 40 ° C.
• Keep out of the reach of children.
• Avoid deformation of the packaging.

User guide:
1. Warm the oil in the gear/transmission to its normal operating temperature.
2. Gently shake the bottle and add the contents of ETEX® to the gear/transmission oil.
3. Start the engine and start operating.
4. Continue operating in normal mode.
In order to obtain the highest technological effect, it is mandatory to follow the terms of use of the product, which in turn will give the best results.