Page 17 – CrossChem Market

Disinfectant gel DezinCross1 for hands 1 L (with dispenser) CrossChem

Disinfectant “DezinCross-1” – ready-to-use hand and alcohol-based disinfectant. The exposure time of hygienic disinfection is 30-60 sec. After the alcohol evaporates, a pleasant aroma of passion fruit is felt.
The product is intended for external, professional and consumer use only. The product contains isopropanol (70%) and alkyl (C12-16) dimethylbenzylammonium chloride (QAV) (0.1%), which provides its antibacterial properties. The product has a bactericidal, euvirocide, tuberculocidal and limited virucidal effect. Use undiluted.

DezinCross1, disinfectant gel for hands 250 ml (with dispenser), CrossChem

Disinfectant “DezinCross-1” – ready-to-use hand, alcohol-based disinfectant. The exposure time of hygienic disinfection is 30-60 sec. After the alcohol evaporates, a pleasant aroma of passion fruit is felt.
The product is intended for external, professional and consumer use only. The product contains isopropanol (70%) and alkyl (C12-16) dimethylbenzylammonium chloride (QAV) (0.1%), which provides its antibacterial properties. The product has a bactericidal, euvirocide, tuberculocidal and limited virucidal effect. Use undiluted.

DezinCross1, disinfectant gel for hands, 500 ml (with dispenser), CrossChem

Disinfectant “DezinCross-1” – ready-to-use hand alcohol-based disinfectant. The exposure time of hygienic disinfection is 30-60 sec. After the alcohol evaporates, a pleasant aroma of passion fruit is felt.
The product is intended for external, professional and consumer use only. The product contains isopropanol (70%) and alkyl (C12-16) dimethylbenzylammonium chloride (QAV) (0.1%), which provides its antibacterial properties. The product has a bactericidal, euvirocide, tuberculocidal and limited virucidal effect. Use undiluted.

Calcium chloride 77% (road grade) CrossChem

Calcium chloride (CaCl2) in flakes 77% – road dedusting agent.
Perfect for gravel roads. Absorb the moisture in the air, preventing the road surface from foaming.

Bag: 25 kg.
Approximate consumption: 250g/m2 (depends on road surface, traffic intensity, precipitation, etc.).
Volume of the bag covers approximately 100m2. The material is scattered on the gravel road after rain or a previously lowered road.

On the palette: 40 bags.

Brake cleaner (400 ml)

CarCare BRAKE CLEANER 400 ml by CrossChem is a high-performance aerosol cleaner developed for effective and thorough maintenance of vehicle braking systems and clutches. The product quickly dissolves and removes contaminants such as brake dust, oil, grease, and road grime, ensuring optimal functionality of the brake components.

Regular use of CarCare BRAKE CLEANER helps reduce brake noise and vibrations, improves braking efficiency, and contributes to increased driving safety. Its fast-drying formula leaves no residue, making it ideal for both professional automotive workshops and individual vehicle owners.

Manufactured in Latvia by CrossChem, a trusted name in automotive chemicals, this cleaner meets the highest quality standards and is suitable for use on passenger vehicles, commercial fleets, and motorcycles.

Key Benefits:

Effectively removes brake dust, oil, and grease;

Improves braking performance and safety;

Prevents brake squeal and vibration;

Fast-evaporating, residue-free formula;

Suitable for brakes, clutches, and metal surfaces;

Designed for both professional and personal use;

Leather cleaner (400 ml)

CarCare LEATHER CLEANER by CrossChem is a specialised aerosol cleaner and care product for leather and artificial leather surfaces. Its gentle yet effective formula helps remove dirt, dust and stains while polishing the surface and improving its overall appearance. After use, the treated surface is left clean, well maintained and pleasantly scented with a light lemon fragrance.

The product is suitable for vehicle interiors, leather seats, artificial leather items, furniture, bags and other accessories. It can also be used for polishing selected plastic surfaces, furniture and the exterior surfaces of electrical appliances. The convenient 400 ml aerosol can ensures even application and allows precise treatment of the required surface in vehicles, homes, offices or workshops.

Directions for use

Shake the can thoroughly before use. Spray the product onto the surface from a distance of approximately 15–25 cm. Allow it to work for 1–2 minutes, then wipe the surface with a clean, soft cloth or paper towel. Repeat the treatment if the surface is heavily soiled. For a clean and polished finish, buff the surface with a dry cloth after cleaning.

Before applying the product to an unknown, sensitive or painted surface, test it first on a small, inconspicuous area to ensure that it does not cause discolouration or damage. Do not use on materials that may be damaged by moisture.

Composition

Aliphatic hydrocarbons more than 30%, isohexane, butane, propane, silicones and fragrance.

Safety information

Extremely flammable aerosol. Pressurised container: may burst if heated. May cause skin irritation, serious eye damage and drowsiness or dizziness. Toxic to aquatic life with long-lasting effects. Keep out of reach of children.

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke during use. Do not spray on an open flame or other ignition source. Do not pierce or burn the container, even after use. Use only in a well-ventilated area and avoid inhaling the aerosol or vapours. Wear protective gloves and eye or face protection during use.

In case of contact with skin, immediately wash the affected area with plenty of water. If the product enters the eyes, rinse cautiously with clean water for several minutes. Remove contact lenses, if present and easy to do, then continue rinsing. If swallowed or if irritation persists, immediately contact a doctor or poison information centre.

Store in the tightly closed original container in a dry, cool and well-ventilated place at a temperature between –5 °C and +30 °C. Protect from direct sunlight and do not expose to temperatures exceeding +50 °C. Do not store inside a vehicle. An explosive vapour-air mixture may form in poorly ventilated areas.

Dispose of the contents and container in accordance with local waste management regulations.

Universal foam cleaner (400ml)

CrossChem FOAM CLEANER is a multifunctional aerosol cleaner with active foam for the everyday care of various surfaces. The fine and even foam helps effectively remove dirt, dust and stains while allowing the product to remain on the treated surface for longer. After cleaning, the surface is left clean and well maintained, with a pleasant fragrance. The cleaner is suitable for cleaning vehicle interior components, leather and artificial leather, plastic parts, furniture, textiles, glass and metal surfaces. The convenient 400 ml aerosol can ensures even application and allows precise treatment of the required surface in vehicles, homes, offices or workshops.

Directions for use

Shake the can thoroughly before use. Hold the can approximately 10 to 15 cm away from the surface and spray the cleaning foam evenly. Allow the product to work for 1–2 minutes, then wipe the surface with a clean, soft cloth or paper towel. Treat heavier dirt with a soft brush or cloth. When cleaning textiles or other sensitive materials, first test the product on a small, inconspicuous area to ensure that the material does not discolour or become damaged. Wipe glass and metal surfaces before the foam dries completely to prevent residue or cleaning marks.

Composition

Demineralised water, non-ionic surfactants 5–15%, aliphatic hydrocarbons 5–15%, isopropanol, butane, propane and fragrance.

Safety information

Extremely flammable aerosol. Pressurised container: may burst if heated. The product may cause skin irritation and serious eye damage. Keep out of reach of children. Keep away from open flames, hot surfaces, sparks and other ignition sources. Do not smoke during use. Do not spray on an open flame or other ignition source. Do not pierce or burn the container, even after use. Use only in a well-ventilated area and avoid inhaling the aerosol. Wear protective gloves and eye or face protection during use.

In case of contact with skin, immediately wash the affected area with plenty of water. If the product enters the eyes, rinse cautiously with clean water for several minutes. Remove contact lenses, if present and easy to do, then continue rinsing. If irritation or discomfort persists, immediately contact a doctor or poison information centre.

Store in the tightly closed original container in a dry, cool and well-ventilated place at a temperature between –5 °C and +30 °C. Protect from direct sunlight and do not expose to temperatures exceeding +50 °C. Do not store inside a vehicle and keep at a safe distance from heat, fire, sparks and other ignition sources. An explosive vapour-air mixture may form in poorly ventilated areas.

Dispose of the contents and container in accordance with local waste management regulations.

Sodium Hydroxide Liquid 45-50%

Sodium Hydroxide Liquid 45–50% is a highly alkaline aqueous solution widely used in industrial and professional applications. It is commonly applied in chemical manufacturing, water and wastewater treatment, pH adjustment, industrial cleaning, degreasing, pulp and paper production, textile processing and various manufacturing processes where a strong alkaline agent is required.

For professional use only! Store the product in its original, tightly closed container in a cool, dry and well-ventilated place. Protect from incompatible substances, especially acids and certain metals. Keep away from moisture where applicable and avoid contact with aluminium, zinc and other reactive materials. Keep out of the reach of children. Storage conditions and shelf life must comply with the manufacturer’s safety data sheet and product specification.

Danger! Causes severe skin burns and eye damage. May be corrosive to metals. Avoid contact with skin, eyes and clothing. Do not breathe mist or spray. Wear protective gloves, protective clothing and eye/face protection. IF SWALLOWED: Rinse mouth. DO NOT induce vomiting. IF ON SKIN (or hair): Take off immediately all contaminated clothing and rinse skin thoroughly with water. IF INHALED: Move the person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do, and continue rinsing. Immediately contact a POISON CENTER or doctor. Dispose of contents/container in accordance with applicable local and international regulations.

Hydrogen Peroxide 50%

Hydrogen peroxide (H2O2) are widely used in a variety of areas: cleaning the pool and aquariums; particulating and agriculture – as disinfectant.

For professional use only. Store the product in its original packaging, tightly closed, in a cool, dry and well-ventilated place, away from direct sunlight. Do not smoke! Storage temperature: from +1°C to +25°C. Expiry date: 12 months from the date of manufacture (see packaging) in unopened manufacturer’s packaging.
Danger! Harmful by inhalation. Harmful if swallowed. Causes serious eye damage. Irritating to the skin. May cause respiratory irritation. Harmful to aquatic life with long lasting effects.
Use protective gloves/ protective clothing/ eye protection/ face protection. Do not inhale dust/fumes/gas/mist/fumes/spray; Wash hands thoroughly after use; IN EYES: Rinse carefully with water for several minutes. Remove contact lenses if they are inserted and if this can be done easily. Continue rinsing. ON SKIN (or hair): Remove all contaminated clothing immediately. Rinse the skin with water [or take a shower]. IF SWALLOWED: Rinse mouth. DO NOT induce vomiting; IN CASE OF INHALATION: remove victim to fresh air and ensure unhindered breathing. Contact a POISON CENTER or doctor immediately; Dispose of contents/packaging in accordance with local legislation. Protect from children!

Sodium Hypochlorite 10-15%

Sodium Hypochlorite 10–15% is an aqueous solution with strong oxidising, bleaching and disinfecting properties. It is widely used in water and wastewater treatment, industrial cleaning, disinfection processes, surface sanitation, bleaching applications and other professional processes where an effective chlorine-based oxidising agent is required.

For professional use only! Store the product in its original, tightly closed container in a cool, dry and well-ventilated place. Protect from direct sunlight, heat and incompatible substances. Keep away from acids, ammonia, reducing agents and other materials that may react with sodium hypochlorite. Do not mix with acids, as hazardous chlorine gas may be released. Keep out of the reach of children. Storage conditions and shelf life must comply with the manufacturer’s safety data sheet and product specification.

Danger! Causes severe skin burns and eye damage. Very toxic to aquatic life. Contact with acids may release toxic gas. Avoid breathing mist, vapours or spray. Wear protective gloves, protective clothing and eye/face protection. IF SWALLOWED: Rinse mouth. DO NOT induce vomiting. IF ON SKIN (or hair): Take off immediately all contaminated clothing and rinse skin thoroughly with water. IF INHALED: Move the person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do, and continue rinsing. Immediately contact a POISON CENTER or doctor. Avoid release to the environment and dispose of contents/container in accordance with applicable local and international regulations.

Call us