Winter windshield washer fluid ETA -12 °C is a premium class, ready to use product based on the highest quality ethanol.
The product is especially suitable for the use in winter conditions. The product provides protection against freezing (up to -12 °C (inclusive)). Crystallization of the product begins below -12 °С.
ETA -12 °C quickly and effectively removes road dust, road salt, oil, mud and other dirt from the windshield and headlights. The product does not affect car paint, lacquered surfaces, plastic parts, chrome parts, other metal parts, rubber and wiper rubber. ETA -12 °C product provides good visibility even in the most difficult conditions. ETA -12 °C contains demineralized water, denatured ethanol, ethylene glycol, non ionic surfactant, “Bubble gum” fragrance, denatonium benzonate and dye.
Expiration validity – 3 years.
Kit includes 4 pcs.
Safety set.
The kit includes:
– Storage box;
– Fire extinguisher PA-6 (43A/233B/C) – 1;
– Fire cover 120×180 cm – 1;
– Hydrophobic absorbent minibonnes – 2;
– Hydrophobic absorbent mats 40×40 cm – 10;
– 10 kg universal bulk absorbent – 1;
– Safety gloves with nitrile cover – 1;
– Bags 100 L – 3;
– Safety goggles with direct ventilation – 1;
BET Clean mixture is designed to effectively remove concrete remnants from various metal surfaces and elements. Use: Depending on the degree of dirt, use concentrate or dilution with water 1:3. Wash by hand using protective gloves or a high pressure washer. Allow the product to run for 5-30 min. If necessary, mechanically treat and rinse with clean water. Duration of storage in original, unopened packaging 12 months (see package). Store at +5 °C to +30 °C. Protect from heat sources, sparks, open fire. Keep out of the reach of children, away from food and drink.
WARNING: May be corrosive to metals. Causes severe skin burns and eye damage. May cause respiratory irritation.
Keep only in original container. Do not breathe dust / fume / gas / mist / vapours / spray. IF ON SKIN (or hair): Remove / Take off immediately all contaminated clothing. Rinse skin with water / shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF exposed: Call a POISON CENTER or doctor / physician. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF exposed or concerned: Call a POISON CENTER / doctor. Dispose of contents / container to hazardous or special waste collection point. Protect from children!
BET Clean PRO, concentrate: Use the concentrate in dilute with demineralised water in a ratio of 1:3. ATTENTION! Undiluted concentrate does not remove concrete, product efficiency is achieved only in the form of diluted solution. The product is intended for effective removal of concrete and cement residues from various metal surfaces as well as from other surfaces that are resistant to acids (for example: tiles, bricks, plastic, granite, etc.). The product does not contain inorganic acids or organic solvents. The product is biodegradable. Instructions for use: At the beginning mechanically clean the surface to be treated and remove as much concrete, cement or mortar remains as possible, then wet the surface with water. Spray the product on the surface to be cleaned and let it work for 5-30 min. Cleaning should be done with cleaning accessories or by hand, using protective gloves, or by using a high-pressure washer. If necessary, treat the surface mechanically with cleaning accessories. Depending on the amount of concrete, cement or mortar residue, repeat the cleaning process several times until the surface has reached desired level of cleanliness. After cleaning, rinse the surface with plenty of water. Store the product in its original packaging, closed, in a cool, dry and well-ventilated place, away from direct sunlight. Storage temperature: from +5 °C to +30 °C. Expiry date: 12 months from the date of manufacture (see packaging) in unopened manufacturer’s packaging. Composition: Demineralized water; Glycolic acid; L-(+)-lactic acid; Nonionic surfactants <5%. Causes severe skin burns and eye damage. Causes serious eye damage. Do not inhale dust / fumes / gas / mist / fumes / spray; Use protective gloves / protective clothing / eye protection / face protection; Wash hands thoroughly after use; ON SKIN (or hair): Remove all contaminated clothing immediately. Rinse the affected area, the skin with water [or take a shower]; IN EYES: Rinse carefully with water for several minutes. Remove contact lenses if they are inserted and if this can be done easily. Continue rinsing; IN CASE OF INHALATION: take the victim to fresh air and ensure unhindered breathing; Dispose of contents/container in accordance with local and international regulations. Protect from children!
Pump set with stainless steel bracket for IBC containers
Self-priming diaphragm pump with IP55 rating for AdBlue fluid.
The pump operates in a continuous duty cycle.
Maximum lifting capacity 4 meters vertically.
6 meters of antistatic dispensing hose and all accessories.
SEC connector for suction pipe and swivel adapter for suction from bottom valve.
The pump set includes:
AdBlue® diaphragm pump 230V, delivery capacity 30-35 l/min
AdBlue® nozzle automatic,
6 meter hose,
SEC connector for suction pipe,
DIN61 swivel adapter for bottom valve,
stainless steel bracket for IBC,
Nozzle holder.
“TankMaster – AdBlue transport tank (maximum density up to 1100 kg/m3)
Volume – 6000 liters
Durable construction
Unique shapes with increased tank rigidity
Small unremovable balance
Drain hole at the bottom for convenient emptying of the tank
Grade marks
Dimensions – width 1900 mm, length 3270 mm, height 1475 mm
Equipment:
– single-wall tank made of UV-resistant polyethylene
– 2″” outlet, stainless steel ball valve
– 16″” inspection hatch with a special sprinkler
– An air valve is integrated into the lid of the inspection hatch
– Built-in mounting points 6 pcs”
TankMaster – Transport tank for liquid mineral fertilizers (maximum density up to 1400 kg/m3)
Volume – 6000 liters
Durable construction
Unique shapes with increased tank rigidity
Small unremovable balance
Drain hole at the bottom for convenient emptying of the tank
Grade marks
Dimensions – width 1900 mm, length 3270 mm, height 1475 mm
Equipment:
– single-wall tank made of UV-resistant polyethylene
– 2″ outlet, stainless steel ball valve
– 16″ inspection hatch with a special sprinkler
– An air valve is integrated into the lid of the inspection hatch
– Built-in mounting points 6 pcs
“TankMaster – Transport tank for technical water (maximum density up to 1000 kg/m3)
Volume – 6000 liters
Durable construction
Unique shapes with increased tank rigidity
Small unremovable balance
Drain hole at the bottom for convenient emptying of the tank
Grade marks
Dimensions – width 1900 mm, length 3270 mm, height 1475 mm
Equipment:
– single-wall tank made of UV-resistant polyethylene
– 2″” outlet, stainless steel ball valve
– 16″” inspection hatch with a special sprinkler
– An air valve is integrated into the lid of the inspection hatch
– Built-in mounting points 6 pcs”
Pump set with stainless steel bracket for 200L drums
Self-priming diaphragm pump with IP55 rating for AdBlue fluid.
The pump operates in a continuous duty cycle.
Maximum lifting capacity 4 meters vertically.
6 meters of antistatic dispensing hose and all accessories.
SEC connector for suction pipe and swivel adapter for suction from bottom valve.
The pump set includes:
AdBlue® diaphragm pump 230V, delivery capacity 30-35 l/min
AdBlue® nozzle automatic,
6 meter hose,
SEC connector for suction pipe,
DIN61 swivel adapter for bottom valve,
stainless steel bracket for 200L barrel,
Nozzle holder.
Electric multipump
The electric pump is made of PP plastic, IP55
2 m discharge hose and manual nozzle with ø19 mm discharge nozzle.
Two adapters with Mauser and Trisure thread included.
Suitable for 200l drums and IBCs.
The pump is quiet in use and easy to transport.
Suction pipe length: 850-1245 mm
Suction pipe max. diameter: ø48 mm
Power: 12V DC and 230V AC
Power cord: 4.5 m
Capacity: 14 l/min
Duty cycle: max. 15 min, 30 min break
Thread: 2”BSP (M)
Gasket: Viton
Net weight: 2.4 kg
Suitable for: AdBlue®, water, antifreeze, windshield washer fluid.