Page 5 – CrossChem Market

SanPro Gel, acidic gel cleaner for sanitary surfaces (1L)

Ready-to-use acidic gel cleaner for deep cleaning of sanitary surfaces, equipment and water tanks. The product effectively helps remove limescale, rust stains, deposits, deeply ingrained dirt and other signs of use. Its gel consistency provides good adhesion to surfaces, allowing the product to work effectively on vertical surfaces and enabling the active ingredients to remain in contact with the area being cleaned for longer. After cleaning, it leaves a fresh fragrance and is particularly suitable for use in areas with hard water.

SanPro Gel is also effective for cleaning hot tubs, especially where prolonged use has resulted in limescale deposits, rust stains, ingrained dirt and visible signs of wear. The gel formula adheres well to the surface being cleaned and helps soften and remove accumulated dirt, making it easier to clean areas that are more difficult to maintain.

SanPro Gel is suitable for cleaning toilet bowls, urinals, bidets, bathtubs, sinks, shower trays, shower enclosures, ceramic floors and walls. The product is intended for professional use in households, healthcare facilities, social care homes, agriculture, the food industry and catering establishments.

Instructions for use
Before using the product, wipe away loose dirt with a dry cloth or paper towel, or remove it with a vacuum cleaner. The product is ready to use and does not need to be diluted. Apply the product directly to the surface to be cleaned by spraying or using a damp cloth or paper towel. Leave the product to act for 2–10 minutes, then clean the surface. After cleaning, rinse the surface thoroughly with running water. Remove dissolved dirt and any remaining solution with a dry cloth or paper towel. After cleaning surfaces or equipment, ventilate the room for at least one hour or longer if necessary.

Product composition
Contains phosphoric acid, less than 5% non-ionic surfactants and fragrance.

Physical and chemical properties
Product pH in a 1% solution: 2 ± 0.5. Shelf life: 36 months from the date of manufacture in unopened manufacturer’s packaging.

Storage
Store in the original, tightly closed packaging in a dry, cool and well-ventilated place, protected from direct sunlight. Recommended storage temperature: +5 °C to +35 °C. Keep out of reach of children and unauthorised persons. The surfactants contained in the product comply with the biodegradability criteria established by Regulation (EC) No. 648/2004 on detergents.

Danger! The product causes skin irritation and serious eye damage. When using the product, wear protective gloves, protective clothing, eye protection and face protection. Wash hands thoroughly after use. In case of skin contact, wash the affected area with plenty of water. If skin irritation occurs, seek medical advice. In case of eye contact, rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do, and continue rinsing. If swallowed, rinse the mouth with plenty of water and do not induce vomiting. If the person is conscious, give them water to drink. Do not give anything by mouth to an unconscious person. Seek emergency medical assistance immediately. In an emergency, call 112 or the Poison and Drug Information Centre at +371 67042473.

Keep out of reach of children! Additional information and safety instructions are available on the product label and in the Safety Data Sheet.

SanPro Gel, acidic gel cleaner for sanitary surfaces (5L)

A ready-to-use acidic gel cleaner for the daily cleaning of sanitary surfaces and equipment. The product effectively helps remove limescale, rust stains, deposits and other dirt commonly found in sanitary areas. Its gel consistency provides good adhesion to surfaces, allowing the product to work effectively on vertical surfaces. It leaves a fresh fragrance after cleaning and is suitable for use in areas with hard water.

SanPro Gel is suitable for cleaning toilet bowls, urinals, bidets, bathtubs, washbasins, shower trays, shower enclosures, ceramic floors and walls. The product is intended for professional use in households, healthcare facilities, residential care homes, agriculture, the food industry and catering establishments.

Directions for use
Before using the product, remove loose dirt with a dry cloth or paper towel, or collect it using a vacuum cleaner. The product is ready to use and does not require dilution. Apply the product directly to the surface to be cleaned by spraying it or using a damp cloth or paper towel. Leave the product to act for 2–10 minutes, then scrub the surface. For stubborn dirt, use a brush. After cleaning, rinse the surface thoroughly with running water. Remove dissolved dirt and any remaining solution with a dry cloth or paper towel. After cleaning surfaces or equipment, ventilate the room for at least one hour or longer if necessary.

Product composition
Contains phosphoric acid, less than 5% non-ionic surfactants and fragrance.

Physical and chemical properties
Product pH in a 1% solution: 2 ± 0.5.
Shelf life: 36 months from the date of manufacture in the unopened original manufacturer’s packaging.

Storage
Store in the original, tightly closed container in a dry, cool and well-ventilated place, protected from direct sunlight. The recommended storage temperature is from +5 °C to +35 °C. Keep out of reach of children and unauthorised persons.

The surfactants contained in the product comply with the biodegradability criteria established by Regulation (EC) No. 648/2004 on detergents.

Danger! The product causes skin irritation and serious eye damage. Wear protective gloves, protective clothing, eye protection and face protection when using the product. Wash hands thoroughly after use. In case of contact with skin, wash the affected area with plenty of water. If skin irritation occurs, seek medical attention. In case of contact with eyes, rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do, and continue rinsing. If swallowed, rinse the mouth with plenty of water and do not induce vomiting. If the person is conscious, give them water to drink. Do not give anything by mouth to an unconscious person. Contact emergency medical services immediately. In an emergency, call 112 or the Poison and Drug Information Centre at +371 67042473.

Keep out of reach of children! Additional information and safety instructions are available on the product label and in the safety data sheet.

SanPro DOSE, concentrated acidic cleaner for sanitary surfaces (1L)

San Pro DOSE is a concentrated acidic cleaner designed for the thorough cleaning of sanitary areas, surfaces and equipment. The product is intended for professional use only.

Its strong acid-based formula effectively helps remove mineral-based dirt, rust stains, hard water deposits, cement residues, soap scum and greasy dirt. After cleaning, surfaces are left clean and shiny.

San Pro DOSE is suitable for the thorough cleaning of washable surfaces, including floors, walls, toilet bowls, urinals and washbasins.

Directions for use
Before using the product, remove loose dirt with a dry cloth or paper towel, or collect it using a vacuum cleaner. Depending on the degree of soiling, dilute 20–200 ml of the product in 1 litre of cold water. For particularly stubborn dirt, use the product and water in a 1:1 ratio. Apply the prepared solution to the surface to be cleaned, leave it to act for 2–10 minutes and then scrub the surface. After use, rinse thoroughly with running water. Once the desired cleaning result has been achieved, remove dissolved dirt and any remaining solution with a dry cloth or paper towel. After cleaning surfaces or equipment, ventilate the room for at least one hour or longer if necessary.

Product composition
Contains phosphoric acid, methanesulfonic acid and less than 5% non-ionic surfactants.

Physical and chemical properties
Product pH in a 1% solution: 2 ± 0.5.
Shelf life: 36 months from the date of manufacture in the unopened original manufacturer’s packaging.

Store in the original, tightly closed container in a dry, cool and well-ventilated place, protected from direct sunlight. The recommended storage temperature is from +5 °C to +35 °C.

Keep out of reach of children and unauthorised persons. The surfactants contained in the product comply with the biodegradability criteria established by Regulation (EC) No. 648/2004 on detergents.

Safety information
Danger! Causes severe skin burns and serious eye damage. Do not breathe vapours, gas, fumes, mist or spray. Wear protective gloves, protective clothing, eye protection and face protection when using the product. Wash hands thoroughly after use. If swallowed, rinse the mouth and do not induce vomiting. If the person is conscious, immediately give them water to drink. Do not give anything by mouth to an unconscious person. In case of contact with skin or hair, immediately remove all contaminated clothing and rinse the skin with plenty of water or take a shower. In case of contact with eyes, rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do, and continue rinsing. If inhaled, move the affected person to fresh air and keep them in a position comfortable for breathing. Immediately contact a Poison Information Centre or a doctor. In an emergency, call 112 or the Poison and Drug Information Centre at +371 67042473.

Dispose of the product contents and container in accordance with local and international regulations.

Keep out of reach of children! Additional information and safety instructions are available on the product label and in the safety data sheet.

MULTI GLASS cleaner (5L)

MULTI GLASS Glass Surface Cleaner is a ready to use professional cleaning solution based on ethanol, developed for effective cleaning of glass, mirrors and other washable surfaces resistant to water and cleaning agents. It is ideal for vehicle windscreens, side windows, rear view mirrors and other automotive glass surfaces, as well as windows, window frames, display counters and other glass surfaces.

Its advanced formula quickly and effectively removes dirt, dust, fingerprints and other residues without leaving streaks or smears. The fast evaporating formula provides crystal clear glass and excellent visibility, making it especially suitable for maintaining clean vehicle windows and ensuring safer driving conditions.

MULTI GLASS is suitable for both automotive care and professional or everyday cleaning in offices, commercial premises and households. It can be used on windows, mirrors, glass display cases, window frames and other washable surfaces. The product is ready to use and requires no dilution. Simply spray directly onto the surface or onto a microfiber cloth for fast and effective cleaning.

The surfactants used in the product comply with biodegradability requirements.

Composition: Non ionic surfactants <5%, ethanol, (2-methoxymethylethoxy)propanol.

Storage: Store in the original tightly closed container in a cool, dry and well ventilated place away from direct sunlight. Storage temperature: +5 °C to +35 °C.

Shelf life: 36 months.

Inox Bright, stainless steel surface cleaner (750ml)

Professional stainless steel cleaner and polish based on natural mineral oils. It effectively removes fingerprints, restores the appearance of worn stainless steel surfaces, and creates a protective coating that repels water and dirt. The non-abrasive formula provides a long-lasting shine without scratching the surface.

Suitable for cleaning and protecting non-food-contact stainless steel surfaces, including elevators, refrigerators, steamers, waste bins, display stands and other stainless steel equipment.

Key Benefits

Removes fingerprints.
Creates a protective coating against water and dirt.
Restores the appearance of stainless steel surfaces and provides a long-lasting shine.
Non-abrasive – will not scratch surfaces.
Ready to use.
Neutral pH 7.

Directions for Use

Apply a small amount of the product to a clean, soft cloth or paper towel. Spread evenly over the surface and polish with a dry, lint-free cloth until the desired shine is achieved. For larger surfaces, the product may be sprayed directly onto the surface.

Storage

Store tightly closed in the original container in a cool, dry and well-ventilated place at temperatures between +5 °C and +35 °C, away from direct sunlight. Shelf life: 36 months from the date of manufacture in the unopened original packaging.

Safety Information

Danger! May be fatal if swallowed and enters airways. May cause an allergic skin reaction. Contains D-limonene. May produce an allergic reaction. Keep out of reach of children. Avoid breathing vapours, gas, fumes, mist or spray. Wear protective gloves, protective clothing and eye/face protection.

IF ON SKIN: Wash with plenty of water. If skin irritation or rash occurs, seek medical advice/attention.

IF SWALLOWED: Immediately call a Poison Centre or physician. Do NOT induce vomiting.

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do, then continue rinsing.

Dispose of contents/container in accordance with local and international regulations.

Emergency advice: If swallowed, rinse the mouth thoroughly with water. Do not induce vomiting. Keep the person warm and try to prevent shock. If the person is conscious, give plenty of water to drink. Do not give anything by mouth to an unconscious person. Seek immediate medical attention if the person feels unwell. In case of emergency, call 112 or your local Poison Information Centre.

ACTIVE FOAM for contactlesswashing (20L)

For professional use only! Concentrated liquid alkaline agent for initial and thorough contactless washing, cleaning and degreasing of motor vehicles, aircraft, helicopters, tanks and ships. The product can also be used for cleaning other very dirty and greasy surfaces. The product is suitable for use in washing halls, warehouses, structures, floor cleaning, walls, ceilings and roofs. Cleans and refreshes dirty surfaces. The product has strong cleaning, washing and degreasing properties. Foams effectively even at low concentrations. Easy to rinse. Contains a special combination of surfactants and complexing agents, which provides a strong cleaning effect on the surfaces to be cleaned and provides a glossy effect on the cleaned surface. The product is intended for use on surfaces that are resistant to water, alkalis and detergents. The product is suitable for use in the following systems: spraying, pressure washing systems, foam washing.

INGREDIENTS:

Sodium hydroxide, Anionic surfactants 5-15%; Non-ionic surfactants <5%, EDTA (ethylenediaminetetraacetic acid) and its salts <5%.

DANGER:

May be corrosive to metals; Causes severe skin burns and eye damage. Do not breathe vapour/gas/smoke/fumes/spray. Wash hands thoroughly after handling; Wear protective gloves/protective clothing/eye protection/face protection; IF SWALLOWED: Rinse mouth. DO NOT induce vomiting; IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing; IF IN CONTACT WITH SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]; IF INHALED: Remove victim to fresh air and keep comfortable for breathing; Immediately call a POISON CENTER or doctor/physician; Dispose of contents/container in accordance with local and international regulations.

INSTRUCTIONS FOR USE:

Depending on the degree of dirt, dilute the product with lukewarm water in the following ratio: -When using a foam gun from 1:1 to 1:5; -Spray washing: from 1:10 to 1:40; -Pressure washing system from 1:1 to 1:50; -Hand washing: 1:100 to 1:200. The product should be used in the form of a diluted water solution. Using a sprayer, foam gun, or with a sponge soaked in the prepared product, apply the prepared solution to the surface to be cleaned, from top to the bottom. Wait approximately 1-2 minutes and let the product take effect. Do not allow the product to dry on the surfaces of the vehicle or machinery. Then rinse the surface thoroughly with a water jet. Important! The product is prohibited to be used in direct sunlight or when the surface to be washed is hot!. Good ventilation must be ensured in closed rooms. Use on surfaces that are resistant to water and alkaline detergents.

Store the product in its original packaging, tightly closed, in a cool, dry and well-ventilated place, away from direct sunlight. Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Do not smoke. Keep out of reach of children! Storage temperature: from +5 °C to +35 °C. Shelf life: 36 months from the date of manufacture (see on the packaging) in unopened manufacturer’s packaging. Batch No.: See on the packaging. The surfactants contained in the product comply with the biodegradability criteria in accordance with EC Regulation 648/2004 on detergents.

Universal Floor Cleaner (1L)

Universal Floor Cleaner is a universal floor cleaning detergent based on Marseille soap, designed for daily maintenance. Its enhanced cleaning and degreasing properties help effectively remove everyday dirt and greasy deposits without leaving streaks or smears on the cleaned surface. After washing, the product leaves a pleasant floral fragrance.

The product is suitable for ceramic and porcelain stoneware tiles, laminate, linoleum, vinyl flooring, lacquered surfaces and other washable floors. It can be used both in households and for professional cleaning in offices, public spaces, educational and care institutions, retail premises and production facilities.

Depending on the degree of soiling, dilute 5–20 ml of the product in 1 litre of running water. Clean the floor with the prepared solution using a mop, cloth or suitable floor-cleaning equipment. Before first use, it is recommended to test the product’s compatibility with the surface on a small, less visible area. Always follow the floor covering manufacturer’s care instructions.

Product composition: Contains less than 5% anionic and non-ionic surfactants, as well as less than 5% fragrance composition and polycarboxylates. The surfactants contained in the product comply with the biodegradability criteria established by Regulation (EC) No. 648/2004 on detergents.

Product pH in a 1% solution: 8.
pH of the undiluted product: 8.5–9.
Density at 20 °C: 1.02 g/cm³.
Colour: pink.
Fragrance: characteristic, floral.
Freezing point: 0 °C.
Solubility in water: fully soluble.
The product is not flammable and is not explosive.

Warning! Causes eye irritation. Keep out of reach of children. Avoid contact with eyes, skin and clothing. Do not eat or drink while using the product. Wash hands and face after use. If there is a risk of the product entering the eyes, wear safety goggles. Ensure adequate ventilation in the area.

In case of contact with eyes: immediately rinse cautiously with plenty of water for at least 15 minutes, keeping the eyelids open. Remove contact lenses, if present and easy to do. Continue rinsing. If you feel unwell or irritation persists, seek medical attention.

In case of contact with skin: remove contaminated clothing and footwear. Wash the affected skin thoroughly with plenty of water and soap. Wash contaminated clothing before reuse.

If inhaled: move the affected person to fresh air and away from the source of exposure.

If swallowed: do not induce vomiting. Seek medical attention immediately. If damage to the digestive system is suspected, do not give the affected person anything to drink.

Store in the original, tightly closed and properly labelled container at a temperature from +5 °C to +35 °C. Protect from low and high temperatures and direct sunlight. Keep out of reach of children and unauthorised persons. Keep away from strong acids, strong bases and powerful oxidising agents.

The product is intended for professional use. For additional information and safety instructions, refer to the product label and safety data sheet.

Clean House and Roof, cleaning agent (1L)

A highly concentrated alkaline cleaner for contactless washing of roofs, facades and other exterior surfaces. The product contains a special combination of surfactants and complexing agents that provides powerful cleaning performance and helps restore the visual appearance of dirty surfaces.

The cleaner effectively helps remove stubborn dirt from roofs, façades and joints, including mortar joints. It is suitable for cleaning the exterior surfaces of warehouses, production buildings, fuel stations, public buildings, private homes and apartment buildings.

Benefits
Powerful cleaning performance; Helps refresh dirty joints and mortar joints; Does not damage suitable alkali-resistant surfaces; Easy to apply; Economical in use; Dilution from 1:10; 1 L of product is sufficient for treating up to 50 m² of surface.

Directions for use
Depending on the degree of surface contamination, dilute 100–150 ml of the product in 1 litre of running water. Apply the prepared solution to the dirty surface using a sprayer. Leave to act for approximately 5 minutes, then rinse thoroughly with pressurised water. Do not use on hot surfaces or surfaces heated by direct sunlight. Do not allow the product to dry on the surface being cleaned. Ensure good ventilation when used indoors. Use only on surfaces resistant to water, alkalis and cleaning agents. Before use, it is recommended to test the product on a small, less visible area.

Composition
Non-ionic surfactants, sodium hydroxide 5–15%.

Danger! May be corrosive to metals. Causes severe skin burns and serious eye damage. Do not breathe vapours, gas, fumes, mist or spray. Wear protective gloves, protective clothing, eye protection and face protection when using the product. If swallowed: rinse the mouth. Do not induce vomiting. In case of contact with eyes: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do, and continue rinsing. In case of contact with skin or hair: immediately remove all contaminated clothing. Rinse the skin with plenty of water or take a shower. If inhaled: move the affected person to fresh air and keep them in a position comfortable for breathing. Immediately contact a Poison Information Centre or a doctor. Dispose of the product contents and container in accordance with local and international regulations.

Keep out of reach of children. Store in the original, tightly closed container in a cool, dry and well-ventilated place, away from direct sunlight, heat sources and sources of ignition. Do not smoke near the product.

The product is intended for professional use. Additional information and safety instructions are provided on the product label.

Clean House and Roof, cleaning agent (20L)

Composition
Non-ionic surfactants, sodium hydroxide 5–15%.

The product is intended for professional use. Additional information and safety instructions are provided on the product label.

Laundry Gel (1.5L)

Laundry Washing Gel

Designed for White and Colored Laundry:
– Dissolves and removes grease and oil stains
– Contains ingredients that prevent fabric wear
– Protects colors during washing
– Suitable for all types of laundry and washing machines

Liquid detergent intended for both soaking and washing all types of fabrics, including cotton and blended fabrics.
Intended for use at temperatures from 30°C to 90°C. Not suitable for washing delicate fabrics and wool.

Usage:
The required amount depends on the water hardness and composition, as well as the fabric type.
Recommendation: 30 – 60 ml per 1 kg of dry laundry.
Temperature: 30°C – 90°C.

Ingredients: anionic and non-ionic agents, surfactants 5–15%, EDTA and its salts, polycarboxylates, soap, optical brightener, fragrance <5%.

PHYSICAL AND CHEMICAL PROPERTIES
Density at 20°C, g/cm³: 1.05 ± 0.5
Product pH (1% solution): 8 ± 0.5
Foaming ability: low
Shelf life: 36 months
Freezing point: < 0°C

Store away from low temperatures and direct sunlight, at a temperature between 5°C and 35°C.
Packaging must remain sealed with the original closure and labeling.
BIODEGRADABLE – the active substances in the product comply with the biodegradability criteria according to Regulation (EC) No. 648/2004 on detergents.

For professional use only. Additional information and safety instructions are provided on the label.

Call us