Car Exterior Kit by CrossChem

This complete car care kit combines four complementary products for effective exterior maintenance, from thorough washing and stubborn tar removal to long-lasting paint protection and a brilliant shine. The included microfiber towel ensures safe application and polishing without leaving scratches or streaks.

The kit includes:

Active Foam 1L
A high-performance pre-wash foam that effectively removes road grime, dirt and traffic film while preparing the vehicle for further cleaning.
For professional use only! Concentrated liquid alkaline agent for initial and thorough contactless washing, cleaning and degreasing of motor vehicles, aircraft, helicopters, tanks and ships. The product can also be used for cleaning other very dirty and greasy surfaces. The product is suitable for use in washing halls, warehouses, structures, floor cleaning, walls, ceilings and roofs. Cleans and refreshes dirty surfaces. The product has strong cleaning, washing and degreasing properties. Foams effectively even at low concentrations. Easy to rinse. Contains a special combination of surfactants and complexing agents, which provides a strong cleaning effect on the surfaces to be cleaned and provides a glossy effect on the cleaned surface. The product is intended for use on surfaces that are resistant to water, alkalis and detergents. The product is suitable for use in the following systems: spraying, pressure washing systems, foam washing.

INGREDIENTS: Sodium hydroxide, Anionic surfactants 5-15%; Non-ionic surfactants <5%, EDTA (ethylenediaminetetraacetic acid) and its salts <5%.

DANGER: May be corrosive to metals; Causes severe skin burns and eye damage. Do not breathe vapour/gas/smoke/fumes/spray. Wash hands thoroughly after handling; Wear protective gloves/protective clothing/eye protection/face protection; IF SWALLOWED: Rinse mouth. DO NOT induce vomiting; IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing; IF IN CONTACT WITH SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]; IF INHALED: Remove victim to fresh air and keep comfortable for breathing; Immediately call a POISON CENTER or doctor/physician; Dispose of contents/container in accordance with local and international regulations.

INSTRUCTIONS FOR USE: Depending on the degree of dirt, dilute the product with lukewarm water in the following ratio: When using a foam gun from 1:1 to 1:5; Spray washing: from 1:10 to 1:40; Pressure washing system from 1:1 to 1:50; Hand washing: 1:100 to 1:200. The product should be used in the form of a diluted water solution. Using a sprayer, foam gun, or with a sponge soaked in the prepared product, apply the prepared solution to the surface to be cleaned, from top to the bottom. Wait approximately 1-2 minutes and let the product take effect. Do not allow the product to dry on the surfaces of the vehicle or machinery. Then rinse the surface thoroughly with a water jet. Important! The product is prohibited to be used in direct sunlight or when the surface to be washed is hot!. Good ventilation must be ensured in closed rooms. Use on surfaces that are resistant to water and alkaline detergents.

Store the product in its original packaging, tightly closed, in a cool, dry and well-ventilated place, away from direct sunlight. Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Do not smoke. Keep out of reach of children! Storage temperature: from +5 °C to +35 °C. Shelf life: 36 months from the date of manufacture (see on the packaging) in unopened manufacturer's packaging. Batch No.: See on the packaging. The surfactants contained in the product comply with the biodegradability criteria in accordance with EC Regulation 648/2004 on detergents.

Bitumen Cleaner (400 ml)
A powerful aerosol cleaner that quickly dissolves and removes tar, bitumen, asphalt residues, grease and other stubborn road contaminants without damaging painted surfaces. CarCare BITUMEN CLEANER 400 ml is a highly effective aerosol cleaner designed to remove even the most stubborn and long-lasting bitumen, tar, and asphalt residues from vehicle surfaces. Its advanced formula penetrates deep into dirt and grease, gently dissolving and lifting contaminants without damaging paintwork or sensitive materials. Perfect for use on cars, motorcycles, and other metallic surfaces, this cleaner restores the treated areas to their original appearance while preserving the surface’s color and finish. It is especially useful after long drives, roadworks, or during seasonal road cleaning when tar and asphalt build-up is common.

The product works quickly and efficiently, making it ideal for both professional detailing and everyday vehicle maintenance.

Key Benefits: Effectively removes tar, asphalt, grease, and road dirt; Penetrates deeply and dissolves contaminants gently; Safe for use on painted and metal surfaces; Restores surface cleanliness and retains original coloring; Ideal for cars, motorcycles, and all metallic parts; Suitable for both professional and personal use;

Crystal Coat - Liquid hydro wax for manual application.
Liquid product for manual polishing and maintenance of car bodies. The product contains a special combination of surfactants, wax and polymers, which provides a strong polishing and protective effect against aggressive external factors on the surface of the vehicle body. “3 in 1” product (wax-polish-paint preservative). The product prevents paint fading, gives excellent shine and creates a hydrophobic surface that protects the paint.

Ingredients: Polydimethylsiloxane; Polycarboxylates 15-30%, Fragrance and aromatic composition. Store the product in its original packaging, tightly closed, in a cool, dry and well-ventilated place, away from direct sunlight. Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Do not smoke. Keep out of reach of children. Keep out of reach of children! Storage temperature: from +5 °C to +35 °C. Shelf life: 36 months from the date of manufacture (see on the package) in unopened manufacturer's packaging. Batch No.: See on the package. Do not get in eyes, on skin or on clothing; IF SWALLOWED: Rinse mouth. DO NOT induce vomiting; IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing; Seek medical attention if you feel unwell; Dispose of contents/container in accordance with local and international regulations.

INSTRUCTIONS FOR USE: The product is ready to use. Shake the product packaging before use. Apply the product by spraying it onto the previously cleaned and dried surface of the vehicle body, using a soft, lint-free cloth, evenly smoothing over the surface. Polish with a microfiber cloth. Do not use in a place exposed to direct sunlight or when the vehicle surface is hot. Indication of necessary emergency first aid: If the product is swallowed, rinse mouth with plenty of water. Do not induce vomiting. Maintain body temperature and try to prevent shock. If the person is conscious, immediately give plenty of water to drink. If the person is unconscious, do not give anything to drink. Immediately after swallowing, contact emergency medical services and seek medical attention. In emergencies, call 112 or the Poisons and Drug Information Center (+371) 67042473.

Microfiber Car Towel (40 × 40 cm)
A soft, high-quality microfiber cloth ideal for drying, applying protective products and polishing surfaces without scratching or leaving lint.

Key benefits: Complete exterior cleaning and protection solution in one kit; Removes both everyday dirt and stubborn road contaminants; Provides a deep gloss and long-lasting hydrophobic protection; Suitable for regular vehicle maintenance at home or for professional use.