Window De-Icer -70°C (750ml)

CrossChem Window De-Icer is an effective winter product designed for the rapid de-icing of vehicle windows in extremely low temperatures. The product is suitable for use at temperatures down to –70 °C and helps quickly remove frost and an approximately 1–2 mm layer of ice from exterior windscreens, side windows and other vehicle glazing.

The high concentration of ethanol and isopropanol acts effectively on frozen moisture, accelerating the melting process and reducing the need for mechanical scraping. This saves time on cold winter mornings and helps reduce the risk of scratching the glass surface caused by intensive use of hard ice scrapers. The product is suitable for both everyday use on private vehicles and professional use by vehicle fleets, logistics companies, service centres and other businesses that require regular and rapid de-icing of vehicle windows.

Directions for use

Before applying the product, remove loose snow from the vehicle windows. Spray CrossChem Window De-Icer evenly onto the iced glass surface, starting from the upper edge and gradually moving downwards. This application method allows the product to flow evenly across the frozen surface and act more effectively on the ice layer.

After application, switch on the vehicle’s windscreen heating and allow the product to work for approximately 1–3 minutes. Once the ice and frost have melted, clean the glass using the vehicle’s windscreen wipers, a rubber scraper or a clean, soft cloth.

Repeat the procedure if the ice layer is thicker or particularly persistent. The speed of action depends on the ambient temperature, the thickness of the ice and the condition of the glass surface. The product is intended for use on exterior vehicle glass surfaces. Avoid applying it to very hot surfaces and do not use it near open flames, sparks or other ignition sources.

Key benefits

Window De-Icer helps quickly melt frost and a thin layer of ice at temperatures down to –70 °C. The product is easy and convenient to use, reduces the need for intensive glass scraping and helps prepare the vehicle for safe driving in winter conditions. It is suitable for various types of vehicle glazing and, when used according to the instructions, is safe for automotive paintwork, lacquered surfaces, plastic components, metal and rubber.

Composition

Ethanol more than 65%, isopropanol more than 9%, demineralised water, non-ionic surfactant and colourant.

Safety information

Flammable liquid and vapour. Causes serious eye irritation. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke near the product during use or storage.

Avoid inhaling vapours, fumes or spray. Wash hands thoroughly after use. Wear suitable protective gloves, protective clothing and eye or face protection when handling the product.

In case of contact with skin or hair, immediately remove all contaminated clothing and rinse the affected area with plenty of water or take a shower.

If the product enters the eyes, rinse cautiously with clean water for several minutes. Remove contact lenses, if present and easy to do, then continue rinsing. If eye irritation persists, seek medical attention.

Storage

Store in the unopened and tightly sealed original manufacturer’s packaging in a cool, dry and well-ventilated place. Protect from direct sunlight, heat, sparks, open flames and other ignition sources.

The recommended storage temperature is between –70 °C and +20 °C. Store the container in an upright position and close it securely after use to reduce evaporation and prevent contamination from entering the packaging.

Shelf life

The shelf life is 36 months from the date of manufacture indicated on the packaging, provided that the product is stored unopened and tightly sealed in the original manufacturer’s packaging under the specified storage conditions.

Dispose of the contents and container in accordance with local waste management regulations.