ACTIVE FOAM agent for contactless vehicle washing and cleaning (20L)

For professional use only! Concentrated liquid alkaline agent for initial and thorough contactless washing, cleaning and degreasing of motor vehicles, aircraft, helicopters, tanks and ships. The product can also be used for cleaning other very dirty and greasy surfaces. The product is suitable for use in washing halls, warehouses, structures, floor cleaning, walls, ceilings and roofs. Cleans and refreshes dirty surfaces. The product has strong cleaning, washing and degreasing properties. Foams effectively even at low concentrations. Easy to rinse. Contains a special combination of surfactants and complexing agents, which provides a strong cleaning effect on the surfaces to be cleaned and provides a glossy effect on the cleaned surface. The product is intended for use on surfaces that are resistant to water, alkalis and detergents. The product is suitable for use in the following systems: spraying, pressure washing systems, foam washing.

INGREDIENTS:

Sodium hydroxide, Anionic surfactants 5-15%; Non-ionic surfactants <5%, EDTA (ethylenediaminetetraacetic acid) and its salts <5%.

DANGER:

May be corrosive to metals; Causes severe skin burns and eye damage. Do not breathe vapour/gas/smoke/fumes/spray. Wash hands thoroughly after handling; Wear protective gloves/protective clothing/eye protection/face protection; IF SWALLOWED: Rinse mouth. DO NOT induce vomiting; IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing; IF IN CONTACT WITH SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]; IF INHALED: Remove victim to fresh air and keep comfortable for breathing; Immediately call a POISON CENTER or doctor/physician; Dispose of contents/container in accordance with local and international regulations.

INSTRUCTIONS FOR USE:

Depending on the degree of dirt, dilute the product with lukewarm water in the following ratio: -When using a foam gun from 1:1 to 1:5; -Spray washing: from 1:10 to 1:40; -Pressure washing system from 1:1 to 1:50; -Hand washing: 1:100 to 1:200. The product should be used in the form of a diluted water solution. Using a sprayer, foam gun, or with a sponge soaked in the prepared product, apply the prepared solution to the surface to be cleaned, from top to the bottom. Wait approximately 1-2 minutes and let the product take effect. Do not allow the product to dry on the surfaces of the vehicle or machinery. Then rinse the surface thoroughly with a water jet. Important! The product is prohibited to be used in direct sunlight or when the surface to be washed is hot!. Good ventilation must be ensured in closed rooms. Use on surfaces that are resistant to water and alkaline detergents.

Store the product in its original packaging, tightly closed, in a cool, dry and well-ventilated place, away from direct sunlight. Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Do not smoke. Keep out of reach of children! Storage temperature: from +5 °C to +35 °C. Shelf life: 36 months from the date of manufacture (see on the packaging) in unopened manufacturer's packaging. Batch No.: See on the packaging. The surfactants contained in the product comply with the biodegradability criteria in accordance with EC Regulation 648/2004 on detergents.