CZYSTY DACH is a highly concentrated alkaline agent for contactless cleaning of roofs and façades. It contains a special combination of surfactants and complexing agents that ensures powerful cleaning performance on treated surfaces. Effectively cleans and refreshes dirty joints (mortar). Designed for use on exterior surfaces such as warehouses and production halls, fuel stations, public buildings, private homes, and apartment buildings.
• Effective cleaning performance
• Does not damage surfaces
• Easy to apply
• Dilution from 1:10 (1L covers up to 50 m²)
Usage: Dilute the product according to the degree of surface contamination, 100–150 ml per 1L of running water. Apply to the dirty surface using a sprayer. Leave for approximately 5 minutes. Rinse thoroughly with water under pressure.
Avoid use on hot or sunlit surfaces. Do not allow the product to dry on the surface. Ensure good ventilation when used indoors. Use only on surfaces resistant to water, alkalis, and cleaning agents.
Composition: non-ionic surfactants, sodium hydroxide 5–15%, EDTA and its salts <5%.
This product is intended for professional use. For more information and safety instructions, refer to the product label.
CZYSTY DACH is a highly concentrated alkaline agent for contactless cleaning of roofs and façades. It contains a special combination of surfactants and complexing agents that ensures powerful cleaning performance on treated surfaces. Effectively cleans and refreshes dirty joints (mortar). Designed for use on exterior surfaces such as warehouses and production halls, fuel stations, public buildings, private homes, and apartment buildings.
• Effective cleaning performance
• Does not damage surfaces
• Easy to apply
• Dilution from 1:10 (1L covers up to 50 m²)
Usage: Dilute the product according to the degree of surface contamination, 100–150 ml per 1L of running water. Apply to the dirty surface using a sprayer. Leave for approximately 5 minutes. Rinse thoroughly with water under pressure.
Avoid use on hot or sunlit surfaces. Do not allow the product to dry on the surface. Ensure good ventilation when used indoors. Use only on surfaces resistant to water, alkalis, and cleaning agents.
Composition: non-ionic surfactants, sodium hydroxide 5–15%, EDTA and its salts <5%. This product is intended for professional use. For more information and safety instructions, refer to the product label.
A broad-spectrum alkaline agent without added phosphates. Washing powder suitable for use in washing machines with manual dosing. For washing all types of colored laundry at 30-60 °C. Colored clothes are recommended to be washed separately for the first 2-3 washes. Do not use when washing wool and silk.
Washing powder contains enzymes that effectively remove grease and dirt. Use 28-48 ml per 1 kg of clothes (depending on the degree of soiling of the laundry and the hardness of the water).
Validity period: 36 months. Storage temperature: -5-35°C.
Store in tightly closed original packaging. Keep away from food, drink and animal feed. Protect from contact with acids. Store the product away from direct sunlight, in an opaque package.
Alkaline agent without added phosphates. Washing powder for white laundry is suitable for use in washing machines with manual dosing. For washing all types of white and light laundry at 30-95 °C. Use 8-12 ml per 1 kg of clothes (depending on the degree of soiling of the laundry). I wash wool and silk without using it.
Washing powder contains enzymes that effectively break down proteins. It contains bleach that bleaches food and drink stains at 50-70°C (the higher the temperature, the more intense the bleaching).
Validity period: 36 months. Storage temperature: -20-35°C. Store in tightly closed original packaging. Keep away from food, drink and animal feed. Keep away from acids.
Active Foam for Vehicle Washing
Composition: Anionic surfactants, sodium hydroxide 5-15%, non-ionic surfactants, EDTA and its salts, fragrance <5%. Possesses strong cleaning, washing, and degreasing properties. Effectively foams even at low concentrations. Easily rinsed off. Removes heavy road and industrial dirt. Application Areas: A highly alkaline concentrated liquid cleaner for pre-wash and main washing, degreasing, and cleaning. Suitable for use on mechanical vehicles, airplanes, helicopters, tanks, and ships, as well as other heavily soiled and greasy surfaces. Also ideal for warehouses, construction floors, walls, ceilings, and roofs. Cleans and refreshes dirty joint surfaces. Contains a special combination of surfactants and complexing agents, ensuring a powerful cleaning and polishing effect on treated surfaces. For use on surfaces resistant to water, alkalis, and detergents. Compatible Systems: • Spraying systems • High-pressure washing systems • Foam equipment How to Use: Dilute the product in running water and apply to the vehicle surface (from bottom to top) using the following concentrations: • Foam method: 1:1 to 1:5 • Spraying method: 1:10 to 1:40 • High-pressure washing: 1:1 to 1:50 • Manual washing: 1:100 to 1:200 Leave for approximately 1 minute (do not allow to dry). After application, rinse the surface thoroughly with cold running water. When cleaning floors with a scrubber machine, use ANTI-FOAM agent as an additive. Attention!!! • Do not use in direct sunlight or on hot surfaces. • Avoid application on surfaces not resistant to alkaline products. Physical and Chemical Properties: • Density at 20˚C, g/cm³: 1.08 ± 0.5 • Product pH (1% solution): 12 ± 0.5 • Foaming capability: High • Shelf life: 36 months • Freezing temperature: >0°C
• Storage conditions: Store in original packaging with labels at 5 to 35˚C, away from low temperatures and direct sunlight.
Ensure the product is inaccessible to unauthorized persons.
For cleaning agricultural vehicles and car surfaces.
Environmentally friendly product, non-corrosive. Intended for dosing.
PRODUCT COMPOSITION:
Non-ionic surfactants 5–15%, potassium hydroxide, EDTA and its salts <5%.
Product intended for professional use. Additional information and safety instructions are provided on the product label and the safety data sheet.
APPLICATION AREA:
Concentrated liquid agent for contactless washing and degreasing of vehicles and agricultural machinery.
Contains a special combination of silicon nanoparticles and surfactants that ensures powerful cleaning action and surface shine.
For use on surfaces resistant to water and cleaning agents.
HOW TO USE:
Dilute the product with clean water and apply to the vehicle surface (from bottom to top) in the following concentrations:
– Foam washing: from 1:1 to 1:10
– Pre-wash: from 1:10 to 1:50
Leave the product on the surface for approximately 1 minute (do not allow it to dry).
After application, rinse thoroughly with a strong stream of running water.
CAUTION:
Do not use in direct sunlight or when the vehicle surface is hot.
For cleaning agricultural vehicles and car surfaces.
Environmentally friendly product, non-corrosive. Intended for dosing.
PRODUCT COMPOSITION:
Non-ionic surfactants 5–15%, potassium hydroxide, EDTA and its salts <5%.
Product intended for professional use. Additional information and safety instructions are provided on the product label and the safety data sheet.
APPLICATION AREA:
Concentrated liquid agent for contactless washing and degreasing of vehicles and agricultural machinery.
Contains a special combination of silicon nanoparticles and surfactants that ensures powerful cleaning action and surface shine.
For use on surfaces resistant to water and cleaning agents.
HOW TO USE:
Dilute the product with clean water and apply to the vehicle surface (from bottom to top) in the following concentrations:
– Foam washing: from 1:1 to 1:10
– Pre-wash: from 1:10 to 1:50
Leave the product on the surface for approximately 1 minute (do not allow it to dry).
After application, rinse thoroughly with a strong stream of running water.
CAUTION:
Do not use in direct sunlight or when the vehicle surface is hot.
For cleaning agricultural vehicles and car surfaces.
Environmentally friendly product, non-corrosive. Intended for dosing.
PRODUCT COMPOSITION:
Non-ionic surfactants 5–15%, potassium hydroxide, EDTA and its salts <5%.
Product intended for professional use. Additional information and safety instructions are provided on the product label and the safety data sheet.
APPLICATION AREA:
Concentrated liquid agent for contactless washing and degreasing of vehicles and agricultural machinery.
Contains a special combination of silicon nanoparticles and surfactants that ensures powerful cleaning action and surface shine.
For use on surfaces resistant to water and cleaning agents.
HOW TO USE:
Dilute the product with clean water and apply to the vehicle surface (from bottom to top) in the following concentrations:
– Foam washing: from 1:1 to 1:10
– Pre-wash: from 1:10 to 1:50
Leave the product on the surface for approximately 1 minute (do not allow it to dry).
After application, rinse thoroughly with a strong stream of running water.
CAUTION:
Do not use in direct sunlight or when the vehicle surface is hot.
Active Foam for Vehicle Washing. Composition: anionic surfactants, sodium hydroxide 5-15%, non-ionic surfactants, EDTA and its salts, fragrance <5%. Possesses strong cleaning, washing, and degreasing properties. Effectively foams even at low concentrations. Easily rinsed off. Removes heavy road and industrial dirt. Application areas: highly alkaline concentrated liquid cleaner for pre-wash, main washing, degreasing, and cleaning. Suitable for use on mechanical vehicles, airplanes, helicopters, tanks, ships, and other heavily soiled and greasy surfaces. Also ideal for warehouses, construction floors, walls, ceilings, and roofs. Cleans and refreshes dirty joint surfaces. Contains a special combination of surfactants and complexing agents, ensuring a powerful cleaning and polishing effect on treated surfaces. Suitable for use on surfaces resistant to water, alkalis, and detergents. Compatible systems: spraying systems, high-pressure washing systems, foam equipment. How to use: dilute the product in running water and apply to the vehicle surface (from bottom to top) using the following concentrations: foam method 1:1 to 1:5, spraying method 1:10 to 1:40, high-pressure washing 1:1 to 1:50, manual washing 1:100 to 1:200. Leave for approximately 1 minute (do not allow to dry). After application, rinse the surface thoroughly with cold running water. When cleaning floors with a scrubber machine, use ANTI-FOAM agent as an additive. Attention! Do not use in direct sunlight or on hot surfaces. Avoid application on surfaces not resistant to alkaline products. Physical and chemical properties: density at 20˚C, g/cm³ 1.08 ± 0.5, product pH (1% solution) 12 ± 0.5, foaming capability high, shelf life 36 months, freezing temperature >0°C. Storage conditions: store in original packaging with labels at 5 to 35˚C, away from low temperatures and direct sunlight. Ensure the product is inaccessible to unauthorized persons.
A liquid product intended for the disinfection of washable surfaces with and without contact with food. It has bactericidal, fungicidal, sporicidal, virucidal and cytotoxic effects against ACM. The product can also be used to disinfect non-porous surfaces to maintain veterinary hygiene in places where animals are raised, kept and transported.
The product works effectively at low concentration and temperature. It is safe for the environment and surfaces.
Apply the product to previously washed and degreased surfaces, dilute in clean running water according to the information available on the product label.
After using the product on food contact surfaces, rinse used surfaces and equipment with cold potable water. After spraying or fogging, the room should be ventilated for about 2 hours before use. When fogging, it is recommended to use a support product: DR FOG PLUS.
Store away from low temperatures and direct sunlight, at temperatures between 5 and 35 ̊C. Containers must have original closures and labels. Protect product containers against access by unauthorized persons.
The surfactants contained in the product meet the criteria of biological degradation according to Regulation EC 648/2004 on detergents.
Australia
Czech Republic
Estonia
Finland
Hong Kong
Iceland
Italy
Japan
Latvia
Norway
Poland
Sweden
Slovenia
Turkmenistan
Ukraine
EVO BlueTech 
AdBlue® 
Auto cleaning products 
Exterior Wash Foams 
Oil additive ETEX® 
De-icer 
Windshield Fluids 
Antifreeze (Coolants) 
Fuel tanks 
AdBlue® tanks 
Other liquide Tanks 
Equipment 
Sand and salt mixture boxes 
Safety baths 
Road barriers 
Cleaning and descaling agents 
Minerālmēsli 
Cleaning and descaling agents 
BET Clean - concrete remover 
Biocid 71 - for diesel tanks 
DezinCross1 - hand and surface disinfectant 
Industrial chemicals 
Water treatment 
Household cleaning products 
Demineralized water 
Heat Transfer Fluids 
Air Fresheners 
Accessories 
Secure Payments 
Fast Delivery 
Return Policy 
Customer Service 
