Page 24 – CrossChem Market

Antifreeze Long Life G12, -36°C (20L)

CrossChem Antifreeze G12 Long Life is a premium ready-to-use coolant based on high-quality ethylene glycol, also known as MEG. It is designed to provide long-term protection for petrol and diesel engine cooling systems against freezing, overheating, corrosion and damage to cooling system components.

Antifreeze G12 Long Life provides freezing protection down to –36 °C and helps maintain stable cooling system performance at temperatures of up to +105 °C. The product is pre-mixed and ready to use, so no additional dilution with water is required. This reduces the risk of incorrect mixing and ensures the required protection level immediately after filling the cooling system.

The effective and balanced corrosion inhibitor package based on OAT, or Organic Acid Technology, provides long-lasting protection against corrosion and damage to cooling system components. Its excellent heat transfer and flow properties support efficient engine cooling and help maintain a stable operating temperature under different driving and operating conditions.

CrossChem Antifreeze G12 Long Life is suitable for long-term use in petrol and diesel internal combustion engine cooling systems in passenger cars, commercial vehicles and trucks. It can be used in systems containing components made from copper, brass, iron, steel and aluminium alloys.

The product is suitable for private vehicles as well as professional use in vehicle service centres, transport companies, manufacturing facilities, agriculture and large vehicle fleets where a reliable long-life coolant is required.

CrossChem Antifreeze G12 Long Life complies with the following quality standards: ASTM D3306, BS 6580, CES 14603, CUNA NC 956-16, ANFOR NF R15-601, SAE J 1034, BWB and FSD 8704.

Directions for use

The product is ready to use. Before filling the cooling system, make sure that G12 Long Life antifreeze meets the requirements specified by the vehicle or equipment manufacturer. Add the product to the cooling system in accordance with the manufacturer’s instructions. Do not add water, as the product has already been prepared at the required concentration.

Do not mix with other coolants unless their chemical compatibility has been confirmed. When replacing an unknown coolant or a coolant based on a different technology, it is recommended to drain and flush the cooling system completely.

Only open the cooling system when the engine is switched off and has cooled down completely. A hot cooling system may be under pressure and may cause burns.

Availability

CrossChem Antifreeze G12 Long Life is available directly from the manufacturer in various packaging sizes and in the quantity required by the customer. Direct manufacturer supply enables competitive pricing for private customers, vehicle service centres, transport companies, manufacturing facilities and vehicle fleets.

Safety information

Harmful if swallowed. Do not breathe mist or vapours. Wash hands thoroughly after handling. Do not eat, drink or smoke while using this product. Wear suitable protective gloves and eye or face protection. If the product enters the eyes, rinse cautiously with clean water for several minutes. Remove contact lenses, if present and easy to do, then continue rinsing. If swallowed, rinse the mouth and immediately contact a doctor or poison information centre. Do not induce vomiting unless instructed to do so by a medical professional. Keep out of reach of children and animals. Store in the tightly closed original container in a cool, dry and well-ventilated place. Prevent the product from entering drains, surface water or groundwater. Use the current CrossChem Antifreeze G12 Long Life safety data sheet for product labelling and published safety information.

Shelf life

3 years.

Antifreeze Long Life G12, -36°C (210L)

CrossChem Antifreeze G12 Long Life complies with the following quality standards: ASTM D3306, BS 6580, CES 14603, CUNA NC 956-16, ANFOR NF R15-601, SAE J 1034, BWB and FSD 8704.

Directions for use

Only open the cooling system when the engine is switched off and has cooled down completely. A hot cooling system may be under pressure and may cause burns.

Availability

Safety information

Shelf life

3 years.

Antifreeze Long Life G12, -36°C (4L)

CrossChem Antifreeze G12 Long Life complies with the following quality standards: ASTM D3306, BS 6580, CES 14603, CUNA NC 956-16, ANFOR NF R15-601, SAE J 1034, BWB and FSD 8704.

Directions for use

Only open the cooling system when the engine is switched off and has cooled down completely. A hot cooling system may be under pressure and may cause burns. Apparently, even coolant insists on basic respect for physics.

Availability

Safety information

Harmful if swallowed. Do not breathe mist or vapours. Wash hands thoroughly after handling. Do not eat, drink or smoke while using this product.

Wear suitable protective gloves and eye or face protection. If the product enters the eyes, rinse cautiously with clean water for several minutes. Remove contact lenses, if present and easy to do, then continue rinsing.

If swallowed, rinse the mouth and immediately contact a doctor or poison information centre. Do not induce vomiting unless instructed to do so by a medical professional.

Keep out of reach of children and animals. Store in the tightly closed original container in a cool, dry and well-ventilated place. Prevent the product from entering drains, surface water or groundwater. Use the current CrossChem Antifreeze G12 Long Life safety data sheet for product labelling and published safety information.

Shelf life

3 years.

CrossChem Tosol -36°C 4L

A high-quality coolant based on ethylene glycol, also known as MEG. It is a ready-to-use, multi-season product that helps protect the engine cooling system against overheating and freezing at temperatures down to –36 °C.

The product does not require additional dilution with water, making it convenient and safe to use.

Tosol contains a balanced combination of corrosion inhibitors based on OAT, or Organic Acid Technology. It helps protect the engine heat exchange and cooling system against corrosion while ensuring efficient heat transfer and stable system operation.

The product is intended for petrol and diesel engines in passenger cars and commercial vehicles. It is suitable for cooling systems containing metal and light-alloy components, including aluminium, brass and copper alloy parts.

CrossChem Tosol complies with the following quality standards: ASTM D3306, BS 6580, CES 14603, CUNA NC 956-16, ANFOR NF R15-601, SAE J 1034, BWB and FSD 8704.

Directions for use

The product is ready to use. Pour it into the cooling system in accordance with the vehicle manufacturer’s instructions. Do not mix with other coolants unless their compatibility has been confirmed.

Shelf life

3 years.

-21°C Winter windshield washer fluid, CrossChem (210L)

Winter windshield washer fluid ETA -21 °C is a premium class, read to use product based on the highest quality ethanol. The product is especially suitable for the use in winter conditions. The product provides protection against freezing (up to -21 °C (inclusive)). Crystallization of the product begins below -21 °С.
ETA -21 °C quickly and effectively removes road dust, road salt, oil, mud and other dirt from the windshield and headlights. The product does not affect car paint, lacquered surfaces, plastic parts, chrome parts, other metal parts and rubber. ETA -21 °C product provides good visibility even in the most difficult conditions. ETA -21 °C contains demineralized water, denatured ethanol, ethylene glycol, non ionic surfactant, “Bubble gum” fragrance, denatonium benzonate and dye.
Expiration validity – 3 years.
Dimensions – Length 0.59 m, Width 0.59 m, Height 0.93 m. Gross weight – 208.59 kg.

Propylene Glycol ECO Heat Transfer Fluid -40°C (4L)

Heat transfer fluid based on propylene glycol with low toxicity is a good alternative to ethylene glycol heat carriers. Propylene glycol (PG) coolants are traditionally used in cooling and heating systems with high demands that require a coolant that is not classified as toxic and where other environmental risk considerations exist.

Propylene glycol heat transfer fluid is a “Premium” class heat transfer fluid which is based on high quality propylene glycol (PG). Product is a ready-to-use and easy-to-use for all seasons, which provides effective protection of the heat exchange system against freezing (up to -40°C) and overheating (up to +90°C), as well as ensure excellent thermal stability and high heat transfer properties. The product contains a balanced composition of corrosion inhibitors and pH buffer solution based on OAT (organic acid technology), which guarantees effective and long-lasting protection against corrosion and damage, as well as protects rubber seals. The use of a heat carrier prolongs the life of the heat exchange system and protects it for extended period of time. The product is intended for long-term use in any HVAC and heat exchange systems. Suitable for systems with metal (copper, brass, iron, cast iron, steel), light-metal (aluminum) alloy parts and plastic parts.

Propylene Glycol ECO Heat Transfer Fluid -40°C (10L)

CrossChem Propylene Glycol ECO Heat Transfer Fluid -40°C 20L

CrossChem Propylene Glycol ECO Heat Transfer Fluid -25°C 210L

Propylene glycol heat transfer fluid is a “Premium” class heat transfer fluid which is based on high quality propylene glycol (PG). Product is a ready-to-use and easy-to-use for all seasons, which provides effective protection of the heat exchange system against freezing (up to -25°C) and overheating (up to +90°C), as well as ensure excellent thermal stability and high heat transfer properties. The product contains a balanced composition of corrosion inhibitors and pH buffer solution based on OAT (organic acid technology), which guarantees effective and long-lasting protection against corrosion and damage, as well as protects rubber seals. The use of a heat carrier prolongs the life of the heat exchange system and protects it for extended period of time. The product is intended for long-term use in any HVAC and heat exchange systems. Suitable for systems with metal (copper, brass, iron, cast iron, steel), light-metal (aluminum) alloy parts and plastic parts.

CrossChem Propylene Glycol ECO Heat Transfer Fluid -25°C 20L

Propylene glycol heat transfer fluid is a “Premium” class heat transfer fluid which is based on high quality propylene glycol (PG). Product is a ready-to-use and easy-to-use for all seasons, which provides effective protection of the heat exchange system against freezing (up to -25°C) and overheating (up to +90°C), as well as ensure excellent thermal stability and high heat transfer properties. The product contains a balanced composition of corrosion inhibitors and pH buffer solution based on OAT (organic acid technology), which guarantees effective and long-lasting protection against corrosion and damage, as well as protects rubber seals. The use of a heat carrier prolongs the life of the heat exchange system and protects it for extended period of time. The product is intended for long-term use in any HVAC and heat exchange systems. Suitable for systems with metal (copper, brass, iron, cast iron, steel), light-metal (aluminum) alloy parts and plastic parts.

Call us

Antifreeze Long Life G12, -36°C (20L)

Antifreeze Long Life G12, -36°C (210L)

Antifreeze Long Life G12, -36°C (4L)

CrossChem Tosol -36°C 4L

-21°C Winter windshield washer fluid, CrossChem (210L)

Propylene Glycol ECO Heat Transfer Fluid -40°C (4L)

Propylene Glycol ECO Heat Transfer Fluid -40°C (10L)

CrossChem Propylene Glycol ECO Heat Transfer Fluid -40°C 20L

CrossChem Propylene Glycol ECO Heat Transfer Fluid -25°C 210L

CrossChem Propylene Glycol ECO Heat Transfer Fluid -25°C 20L

Secure Payments

Fast Delivery

Return Policy

Customer Service